1 / 6
CEN Racing F450 Super Duty Underbody Protection — image 1
1 / 6

CEN Racing F450 Super Duty Underbody Protection

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Underbody protection to keep debris out of the cab, and to protect the lower edges of the body. Optional running…

Rating
0 / 5
Likes
16
Downloads
162
Makes
0
Views
862
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Underbody protection to keep debris out of the cab, and to protect the lower edges of the body. Optional running boards and front fenders attach to the side plates.

Update (May 27 2021): Added two smaller files for those with smaller print beds. You should be able to print "PartA" and "PartB" and each has two screw attachment points or you can glue them together to make the full piece. You can also print the running board on a 150x150 bed if you turn it 45º.

Print Settings

Rafts:

No

Supports:

No

Resolution:

200

Infill:

20

Filament: Overture PLA

Notes:

Flip the side panels upside down and flat and use a wide brim. The brim supports the first layer of the outer section until it bridges to the rest of the body, but it is about .2 off the floor so it needs some help.

Category: R/C Vehicles

Tags