Magnetic Klingon Badge (8mm magnets)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
After seeing my remix of the Star Trek Com Badge, a friend asked me for a Klingon badge. I used the same 8mm magnets…
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 85
- Wydruki
- 1
- Wyświetlenia
- 345
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial
After seeing my remix of the Star Trek Com Badge, a friend asked me for a Klingon badge. I used the same 8mm magnets (they measure about 8mm x 2.7mm). I've tried to not cut tolerances too tight. I believe I am using https://www.amazon.com/gp/product/B07DD61G2F
Export of Fusion 360 project included.
Also see my Star Trek Com Badge remixed using 8mm magnets. https://www.thingiverse.com/thing:3956136
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
15%
Filament: CC3D, Hatchbox PLA, 1.75 Silk Silver (CC3D), Hatchbox (Red)
Notes:
The underside of the badge has a recess for the magnet. I used supports for this, but that may not be necessary for most printers.
Carefully insert the Inset into the Badge - no glue should be necessary, it should be snug but not too snug (I hope). Use CA glue to affix the magnets if necessary.
How I Designed This
I found an SVG of the general design. I brought the SVG into Affinity Designer (into a 96 dpi document) to set the correct size and simplify the design for my purposes. I exported that SVG. I brought that export into Fusion 360.
I re-drew the model based on the SVG, improving wall thicknesses and fixing some lines that should be parallel.
Category: Props