Magnetic Klingon Badge (8mm magnets)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
After seeing my remix of the Star Trek Com Badge, a friend asked me for a Klingon badge. I used the same 8mm magnets…
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 85
- Makes
- 1
- Views
- 344
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial
After seeing my remix of the Star Trek Com Badge, a friend asked me for a Klingon badge. I used the same 8mm magnets (they measure about 8mm x 2.7mm). I've tried to not cut tolerances too tight. I believe I am using https://www.amazon.com/gp/product/B07DD61G2F
Export of Fusion 360 project included.
Also see my Star Trek Com Badge remixed using 8mm magnets. https://www.thingiverse.com/thing:3956136
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
15%
Filament: CC3D, Hatchbox PLA, 1.75 Silk Silver (CC3D), Hatchbox (Red)
Notes:
The underside of the badge has a recess for the magnet. I used supports for this, but that may not be necessary for most printers.
Carefully insert the Inset into the Badge - no glue should be necessary, it should be snug but not too snug (I hope). Use CA glue to affix the magnets if necessary.
How I Designed This
I found an SVG of the general design. I brought the SVG into Affinity Designer (into a 96 dpi document) to set the correct size and simplify the design for my purposes. I exported that SVG. I brought that export into Fusion 360.
I re-drew the model based on the SVG, improving wall thicknesses and fixing some lines that should be parallel.
Category: Props