MKS TFT32 Display adaptor Ender3, 5, clones, ect.)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a super simple bracket to adapt the stock display mount on a Ender 3 or similar machine. It should take at…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 315
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a super simple bracket to adapt the stock display mount on a Ender 3 or similar machine. It should take at most 3hrs and ~15g to print, so is very simple.
This design is not perfect. STEP file is included incase you want to modify it easily.
V2.1
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Doesn't Matter
Supports:
No
Resolution:
200-300 microns (doesn't matter really)
Infill:
20%
Filament: X3D pro PLA Translucent Blue Post-Printing =============
Assembly
REQUIRED COMPONENTS (not including stock lcd mounting hardware):
0-4 m3*6mm bolts2-4 m3*12mm bolts
M3 washer - 1/6mm bolt, 2-4/12mm bolt
- Remove old display
- Prepare MKSTFT 32
- Slide part onto the the display standoffs. It should be a snug fit.
- Screw on if necessary with a M3*6mm and washer
- Attach MKSTFT with 2-3 M3*12mm screws and 4(1-2 if adapter not bolted to the stock mount) washers each. They may need to go in at a slight angle.
- Plug in AUX1 cable
- Bolt mount back on with 2 M5 screws.
CAUTION:
Before printing check:
The SD card/USB can fit in with the bed sliding back and forth
The USB A socket does not foul on the extrusion
Nothing shorts
NOTE: This may not be comparable with the stock bed levelling screws
Category: 3D Printer Parts