1 / 6
Brio compatible diesel engine
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A brio compatible diesel engine UPDATE 02/09/17 corrected position of holes in diesel_base (use v2) increased diameter…
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 660
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (7)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (37)Powiązane
A brio compatible diesel engine
UPDATE 02/09/17
- corrected position of holes in diesel_base (use v2)
- increased diameter of pilot hole for furniture stud in brio_base_3ax (use v2)
Print the following:
- 1x diesel base
- 1x diesel body
- 6x wheels (supports needed)
- 1x diesel face
- 1x brio base 3ax
I used the following to make the magnetic connectors:
For the wheel axles I used:
General notes
- The face is rubbish; hopefully someone will remix a better one!
- I used superglue on all joints and to stick the face on
- I used acrylic to add detail to the face
- I used a hammer to get the upholstery pins in
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK2 MMU
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.15mm
Infill:
20%
Notes:
Face printed at 0.05mm but still not sufficient to get details.
Category: Toys & Games