Omron Encoder Mount for Grizzly G0602 Lathe
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a bracket to mount an Omron quadrature encoder to a Grizzly G0602 lathe spindle. It's part of the Clough42…
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 109
- Wydruki
- 0
- Wyświetlenia
- 711
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
This is a bracket to mount an Omron quadrature encoder to a Grizzly G0602 lathe spindle. It's part of the Clough42 Electronic Leadscrew project.
The mount is held to the lathe with two M3 screws, and the encoder is attached to the mount with three M3 flat-head screws from underneath. One side of the mount is open to allow passage of a GT2 belt.
Print Settings
Printer:
ELEGO Mars 2 Pro
Rafts:
No
Supports:
Yes
Resolution:
50
Infill:
100
Filament:
ELEGOO ABS-Like
Notes:
I printed it in ABS-Like resin. It would also be suitable for ABS, PETG, Nylon, or other filaments. PLA would likely work, but would be brittle.
Category: Machine Tools