1/2" Loc-Line Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a clamp for anchoring 1/2" Loc-Line to a machine tool for mounting lights, mist coolant, or anything else that…
- Ocena
- 5 / 5
- Polubienia
- 26
- Pobrania
- 182
- Wydruki
- 1
- Wyświetlenia
- 1165
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This is a clamp for anchoring 1/2" Loc-Line to a machine tool for mounting lights, mist coolant, or anything else that needs flexible placement. You will need to print two parts for the complete clamp.
This thing originally contained a FogBuster mounting head that I modified from publicly-available files. It has since been brought to my attention that these files were not being legally distributed, and have since been taken down, so I have removed my derived files here. If you would like to support the original designer, please consider purchasing your parts here: https://www.gforcesolutions.com
The mounting block is my own design, and is designed to mount with 10-32 screws.
Print Settings
Printer:
MakerFarm
Rafts:
No
Supports:
No
Resolution:
0.25
Infill:
25%
Filament:
eSun PETG
Blue
Notes:
Print settings don't really matter. I used PETG because it has good layer adhesion and holds up well in a shop environment and I used .25mm layers for faster printing.
Adjusting the Fit
These parts depend on being able to clamp securely onto the Loc-Line ball joints. If your parts are a too loose after printing, you can rub the mating surfaces on a piece of sandpaper on a hard surface to remove a little material and allow them to clamp together more tightly.
Category: Machine Tools