1/2" Loc-Line Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a clamp for anchoring 1/2" Loc-Line to a machine tool for mounting lights, mist coolant, or anything else that…
- Rating
- 5 / 5
- Likes
- 26
- Downloads
- 182
- Makes
- 1
- Views
- 1,165
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This is a clamp for anchoring 1/2" Loc-Line to a machine tool for mounting lights, mist coolant, or anything else that needs flexible placement. You will need to print two parts for the complete clamp.
This thing originally contained a FogBuster mounting head that I modified from publicly-available files. It has since been brought to my attention that these files were not being legally distributed, and have since been taken down, so I have removed my derived files here. If you would like to support the original designer, please consider purchasing your parts here: https://www.gforcesolutions.com
The mounting block is my own design, and is designed to mount with 10-32 screws.
Print Settings
Printer:
MakerFarm
Rafts:
No
Supports:
No
Resolution:
0.25
Infill:
25%
Filament:
eSun PETG
Blue
Notes:
Print settings don't really matter. I used PETG because it has good layer adhesion and holds up well in a shop environment and I used .25mm layers for faster printing.
Adjusting the Fit
These parts depend on being able to clamp securely onto the Loc-Line ball joints. If your parts are a too loose after printing, you can rub the mating surfaces on a piece of sandpaper on a hard surface to remove a little material and allow them to clamp together more tightly.
Category: Machine Tools