1 / 8

Tron Arcade Digital Flightstick V1.0 - STL Version!

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

3DFreeman

@3DFreeman_227425

So, I admit, mistakes were made when I ordered the transparent PLA. I bought natural instead. It's not nearly as clear…

Ocena: 0 / 5
Polubienia: 10
Pobrania: 110
Wydruki: 0
Wyświetlenia: 877
Oceny: 0

Aktualizacja u źródła: 2 kwi 2025

Informacje o modelu

Źródło: Printables
Kategoria: Other Gadgets
Licencja: Creative Commons — Attribution — Noncommercial — NoDerivatives

Szczegóły Pliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 2)Remiksy (0)Kolekcje (27)

UPDATE 02/04/25: Added Ultimarc & M10x30 Hex nut compatible Tron sticks (Many thanks to user francislej)

UPDATE 01/10/24 : V1.1 now has the ability to have the wiring pass through the joystick stem.

13/06/24 : After spending two years on my Patreon, I am now releasing the STLs for free.

So, I admit, mistakes were made when I ordered the transparent PLA. I bought natural instead. It's not nearly as clear or see-thru as I would have liked and so I improvised and printed my take on a Tron-A-Like flightstick with a 1% infill. Not really recommended from a durability perspective, it turned out to be stronger than I expected but I don't doubt that a strong hand couldn't crush it like an old tin can.

The point then: buy clear not natural PLA (I do have some on order) and then you probably won't need to print the Tron stick so light on the infill side of things for the shiny to show through. Unless of course you just print it a solid colour using non-lit 24mm arcade buttons. So I will stop going on about it now...

This is the my first version, so I went the easiest route, all you require is two 24mm (not 28mm, not 30mm!) arcade buttons. I realise that they are less likely for you to have lying around as spares but they (only just) fit into the dimensions of the unit and if you use illuminated versions, then no need for another light source.