TBS Source One XT60 + SMA Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model is inspired by this entry, but modified to fit the 5-Inch version of the TBS Source One frame. It is also a…
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 422
- Wydruki
- 0
- Wyświetlenia
- 2003
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
This model is inspired by this entry, but modified to fit the 5-Inch version of the TBS Source One frame. It is also a bit easier to print, because I reduced the angle of overhangs.
There are different versions of this mount for the 5-Inch and the 3-Inch version of the TBS Source One frame. Please make sure to print the correct size for your quadcopter!
The 3MF-files include PrusaSlicer printing settings for TPU filament.
There are also STEP-files to make remixing easier. The simplified STEP files can be more easily edited than the final versions, which include a lot of fillets.
Side Note: If you're interested in the ELRS antenna holder that's shown on the pictures, check out this design.
Category: R/C Vehicles