Logitech G402 Cable Strain/Stress Relief
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Strain/stress relief for Logitech G402 for use with a 550 Paracord-sleeved cable
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 608
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Haven't seen strain relief designed for this mouse, even though it was a very popular mouse, so I made one, inspired by the LethalGamingGear model.
For use with custom 550 paracord cable, replaces those normal heat-shrink ones.
Comes in 2 versions, both work well.
There might be issues with cleaning supports for the slotted version though.
I printed the solid version in TPU and Resin. The solid version will probably be fine with rigid/normal filaments like PLA/ABS/PETG/etc. Didn't test the slotted version with flexible resins (SLA) so don't know for that sorry :(
Internal Diameter (ID) = 4.15mm, to accommodate shrinkage.
Outer Diameter (OD) = 5.5mm.
Length (L)
-For solid = 15.1mm
-For slotted version = 23mm
Print Settings
Rafts:
No
Supports:
Doesn't Matter
Resolution:
0.2mm
Infill:
Solid, only walls/perimeters
Filament: eSUN TPU/TPE, PLA
Category: Electronics