1 / 4
Magnetic adjustable spool holder — zdjęcie 1
1 / 4

Magnetic adjustable spool holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Wstępna wycena dla PETG

5,49 € – 6,71 € netto (bez VAT)

Dla pliku: Magnetic_spool_holder_0.2mm_PETG_MK3S_6h35m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 6,10 € netto (środek widełek).

Masa podana przez autora
71 g
Czas druku podany przez autora
6,58 godz.
Materiał u źródła
PET
Materiał wyceny
PETG
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Magnetic adjustable spool holder with bearings which fits 1kg and 2kg Prusament spools

Ocena
5 / 5
Polubienia
17
Pobrania
69
Wydruki
1
Wyświetlenia
994
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

In this remix I've added 2 holes for magnets, some texture to the bottom (to prevent sliding a bit) and nuts for rail mounting.

The holder is able to fit the 2 kg spool of Prusament PLA/PETG Recycled.

You will need:
2x 8x8mm (4mm height) square magnets (N48 or stronger)
4x screw M3 x 8 mm 
4x screw M3 x 14 mm 
8x nut M3
4x Bearings 608

Check the gcode for printing directions, print with 0.2 mm layer height.

Assembly guide:

  1. Put in the screws and the nuts
     
     
  2. Lay one of the pieces on the side and put in the magnets and the bearings

     
  3. Tighten the screws which hold the bearings

     
  4. Insert nuts for the rail holder screws

     
  5. Tighten the rail holder screws for one of the pieces

     
  6. Adjust the other piece for your spool width, and tighten that as well
     
  7. (Optional) Place it on the top of your PrusaBox :)

Tagi