1 / 4
Magnetic adjustable spool holder — image 1
1 / 4

Magnetic adjustable spool holder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Preliminary estimate for PETG

€5.49 – €6.71 net (excluding VAT)

For file: Magnetic_spool_holder_0.2mm_PETG_MK3S_6h35m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €6.10 excluding VAT (range midpoint).

Weight reported by the author
71 g
Print time reported by the author
6.58 hr
Source material
PET
Estimate material
PETG
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Magnetic adjustable spool holder with bearings which fits 1kg and 2kg Prusament spools

Rating
5 / 5
Likes
17
Downloads
69
Makes
1
Views
994
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

In this remix I've added 2 holes for magnets, some texture to the bottom (to prevent sliding a bit) and nuts for rail mounting.

The holder is able to fit the 2 kg spool of Prusament PLA/PETG Recycled.

You will need:
2x 8x8mm (4mm height) square magnets (N48 or stronger)
4x screw M3 x 8 mm 
4x screw M3 x 14 mm 
8x nut M3
4x Bearings 608

Check the gcode for printing directions, print with 0.2 mm layer height.

Assembly guide:

  1. Put in the screws and the nuts
     
     
  2. Lay one of the pieces on the side and put in the magnets and the bearings

     
  3. Tighten the screws which hold the bearings

     
  4. Insert nuts for the rail holder screws

     
  5. Tighten the rail holder screws for one of the pieces

     
  6. Adjust the other piece for your spool width, and tighten that as well
     
  7. (Optional) Place it on the top of your PrusaBox :)

Tags