GameBoy DMG-01 battery pack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a battery-pack shell for use with a DMG-01 (original GameBoy). It's designed to work with these battery…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 504
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a battery-pack shell for use with a DMG-01 (original GameBoy).
It's designed to work with these battery contacts:
Positive Terminal: https://www.aliexpress.com/item/32949854416.html
Negative Terminal: https://www.aliexpress.com/item/4000953728880.html
I've included 3d models of each in this listing, for size reference.
Print Settings
Printer:
TronXY X1
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2mm
Infill:
15
Filament:
3d Solutech PLA
Natural PLA
Notes:
All parts are already oriented how they should be printed on an FDM printer.
Recommended print settings for Cura:- PosTerm - Lots of walls and top/bottom layers, so you'll be sure to have plenty of material around the pilot hole for when you drill your own hole for a screw.
- Body - 0.125mm layer height, plus adaptive layer height with 0.075mm variance. Use support touching the buildplate for the two tabs.
- Clip - Use support touching buildplate.
- Flush Cover - No support. Use decent bridge settings, and bump up "Skin overlap percentage" (I used 20%).
Category: Toy & Game Accessories