GameBoy DMG-01 battery pack
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a battery-pack shell for use with a DMG-01 (original GameBoy). It's designed to work with these battery…
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 31
- Makes
- 0
- Views
- 504
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a battery-pack shell for use with a DMG-01 (original GameBoy).
It's designed to work with these battery contacts:
Positive Terminal: https://www.aliexpress.com/item/32949854416.html
Negative Terminal: https://www.aliexpress.com/item/4000953728880.html
I've included 3d models of each in this listing, for size reference.
Print Settings
Printer:
TronXY X1
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2mm
Infill:
15
Filament:
3d Solutech PLA
Natural PLA
Notes:
All parts are already oriented how they should be printed on an FDM printer.
Recommended print settings for Cura:- PosTerm - Lots of walls and top/bottom layers, so you'll be sure to have plenty of material around the pilot hole for when you drill your own hole for a screw.
- Body - 0.125mm layer height, plus adaptive layer height with 0.075mm variance. Use support touching the buildplate for the two tabs.
- Clip - Use support touching buildplate.
- Flush Cover - No support. Use decent bridge settings, and bump up "Skin overlap percentage" (I used 20%).
Category: Toy & Game Accessories