placemat for Ikea LÅNESPELARE cup holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Very simple cylinder so that a normal coffee mug can fit in the Ikea cup holder.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 21
- Wydruki
- 1
- Wyświetlenia
- 360
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I found that the “LÅNESPELARE” cup holder from Ikea wasn't really suited for coffee mugs, so I decided to make a very simple cylinder so that the bottom of the holder would sit a lot higher. This way, you're able to place a regular size coffee mug inside of the cup holder.
Just print it with the indentations upwards. The infill isn't really important (it wont carry any weight), nor is the layer height (you will barely see it). I do recommend printing it in a dark color, just to make sure that it's not as easely seen.