Star Wars Magnets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Star Wars magnets for your fridge or elsewhere
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 86
- Wydruki
- 0
- Wyświetlenia
- 425
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Following the inspiration from my Marvel Magnets (https://www.printables.com/model/202156-marvel-magnets) I decided to branch out into Star Wars.
I'll spare you the blah blah back story, but it's the same as the one I wrote over there.
I made the ones I did since i had the appropriate colors, feel free to experiment with other ones too. I uploaded a blank base with the magnet holes, so go nuts.
I used these objects on Thingiverse as my top of magnet bits:
https://www.thingiverse.com/thing:4081962
https://www.thingiverse.com/thing:1030033
https://www.thingiverse.com/thing:54961
I needed to print mine with rafts, since the small magnet hole circles just would not stick to my bed. YMMV of course.
I used 5x3mm magnets from Amazon (https://www.amazon.com/gp/product/B08M3H4VP5/) and after some experimentation made the holes 5.2 mm for a bit of tolerance. They were a good friction fit and I tapped them in with a hammer and nail set to be sure.
The color swap was at layer 21 without a raft and 25 with one (using Cura standard raft settings).
None of these needed supports.
Enjoy!