Star Wars Magnets
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Star Wars magnets for your fridge or elsewhere
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 86
- Makes
- 0
- Views
- 425
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Following the inspiration from my Marvel Magnets (https://www.printables.com/model/202156-marvel-magnets) I decided to branch out into Star Wars.
I'll spare you the blah blah back story, but it's the same as the one I wrote over there.
I made the ones I did since i had the appropriate colors, feel free to experiment with other ones too. I uploaded a blank base with the magnet holes, so go nuts.
I used these objects on Thingiverse as my top of magnet bits:
https://www.thingiverse.com/thing:4081962
https://www.thingiverse.com/thing:1030033
https://www.thingiverse.com/thing:54961
I needed to print mine with rafts, since the small magnet hole circles just would not stick to my bed. YMMV of course.
I used 5x3mm magnets from Amazon (https://www.amazon.com/gp/product/B08M3H4VP5/) and after some experimentation made the holes 5.2 mm for a bit of tolerance. They were a good friction fit and I tapped them in with a hammer and nail set to be sure.
The color swap was at layer 21 without a raft and 25 with one (using Cura standard raft settings).
None of these needed supports.
Enjoy!