Da Vinci 1.0 External Filament Feeder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This part will let you feed 1 to 3 filaments into the Da Vinci 1.0 printers. You will need to use the Repetier firmware.
- Ocena
- 4 / 5
- Polubienia
- 5
- Pobrania
- 54
- Wydruki
- 1
- Wyświetlenia
- 434
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I loaded my Da Vinci 1.0A printers with the Repetier firmware so that I can use third party filaments. I needed something to keep the filaments from jamming in the edges of the lid. I created this feeder part to snap into the hole on the back of the printer. It is shaped such that it should print without supports and be a "click in" fit that is secure but removable.
The holes should be 4mm which would allow for PTFE tubing to fit? I haven't tried that yet. You can also just feed the filament through the empty holes which is working for me.
You may need a brim or raft as there is not much of the model touching the bed.