1 / 3
2GT/GT2 Belt Clip/Clamp (6mm 2mm Pitch) Open Belt — zdjęcie 1
1 / 3

2GT/GT2 Belt Clip/Clamp (6mm 2mm Pitch) Open Belt

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Designed to easily clip onto the end of any (6mm 2mm Pitch) 2GT belt for printers using an open belt.

Ocena
4,5 / 5
Polubienia
34
Pobrania
360
Wydruki
2
Wyświetlenia
2356
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I was looking for a very simple 2GT belt clip and couldn't find anything that didn't require additional hardware for an open belt so I came up with this simple design. It features two individual parts that join together to lock the end of the belt in place. It also features a channel along the outside of the housing if you'd like to put a zip tie around it. This is entirely optional as the belt is fully secured without it. PETG is recommended. 

 

Print instructions

Printer: Creality

Model: Ender 3

Rafts: Recommended

Supports: No

Resolution: 0.16

Infill: 25%

3 perimeters
3 tops
3 bottoms

Filament: Overture PETG (PETG is recommended)  

Tagi