2040 + 2020 extrusion foot, based on Eryone Thinker SE design
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple design for a foot that can be positioned at the junction of a 2040 extrusion and a 2020 one.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 568
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Simple design for a foot that can be positioned at the junction of a 2040 extrusion and a 2020 one.
Attaches using 3 T-Nuts and M4 bolts, original design based on the Eryone Thinker SE, but can be used for any printer that uses 2020+2040 extrusions. The foot is 60mm tall.
There is a modified foot with a cable cutout, to allow replacing the one on the back of a Thinker SE which also has it
I designed this to replace the front aluminum cover of the printer, since the cover also acts as front support for the extrusions. If you have the same thing in mind, make sure to also print this LCD mount for 2020 extrusions
Print Settings
Printer:
Eryone Thinker SE
Rafts:
No
Supports:
No
Resolution:
0.4
Infill:
40%
Filament:
eSun PLA+Black
Notes:
You can use whatever layer height you want. For a 0.8mm nozzle at 0.4mm layer height it takes around 1h per foot