Traxxas Big Bore Shocks - Mini-T Spring Perches
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spring perches to allow use of Mini-T springs on Traxxas Big Bore shocks
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 211
- Wydruki
- 0
- Wyświetlenia
- 1739
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you want to use Losi Mini-T springs on your Traxxas big bore shocks, for example p/n 2660, these spring perches will allow you to make the conversion (commonly used on 1/10 scale rock crawlers). This spring perch is designed to allow popping it off over the shock shaft without removing the rod end, so spring swaps are easier.
Recommended spring part numbers: LOSB1117 (Losi) or MTT30FS148 (Hot Racing)
I use both of the above listed part numbers which are meant for the front shocks on Losi Mini-T. The Hot Racing are a little shorter than the Losi springs, so they'll have less preload. You can also use the rear Mini-T springs, they'll just have a lot more preload.
Note: Shock shown in pics is a Traxxas Big Bore shock with some machining done on the body. These spring perches will still work correctly on unmodified Traxxas shocks.