P
PrintablesProginc
Hollowtech II preload cap tool
Better than Shimanos official tool. 8mm hex wrench compatible for max torque (<1nm!!! for tightening)
- Pobrania
- 566
- Polubienia
- 60
- Ocena
- 4,89
Wyniki wyszukiwania: preload
Liczymy pasujące modele…
P
Printablestw
Shimano Hollowtech II Crank Preload Adjuster
This is a simplified version of mckgyver's preload adjuster tool for Shimano Hollowtech II cranks. While mckgyver did most of the work, I've made a few adjustments to make the model easier and quicker to print by removing the concave…
- Pobrania
- 474
- Polubienia
- 26
- Ocena
- 5
P
Printableserre_stvdio
Logitech G29/920/G27/G25 PRELOAD SPACER FOR ALL PEDALS
This is a preload spacer for the Logitech G920, G29, G27, & G25 pedals. May work for others too? Let me know if so and I'll update the descriptions. I included the dimensions so you can figure it out yourself or remake it however you…
- Pobrania
- 397
- Polubienia
- 68
- Ocena
- 5
P
PrintablesDarkstar77
Traxxas Shock Spring Preload Spacer
This is an 8mm tall spring preload spacer, designed for any traxxas vehicle with shocks that use preload spacers on the springs. These snap over the shock cylinder, to increase the preload. Very simple to scale to various thicknesses.…
- Pobrania
- 355
- Polubienia
- 28
- Ocena
- 5
P
Printablesquinkq
SRAM DUB Bottom Bracket Preload Adjuster
SRAM Bottom Bracket Preload Adjuster - MPN: 11.6418.001.001 Modeled replacement for myself after breaking the original (ordering aluminium one from ali probably would have been more time efficient). Printed out of PETG 40% infill months…
- Pobrania
- 322
- Polubienia
- 30
- Ocena
- 0
P
PrintablesFerfi
Stronger Bag Clips but with preload
I've added a slight 1500 mm radius to create some preload. The snap-latch is now also preloaded more. Also the print in place hinge was tweaked. It is now hopefully easier to print - but I must admit I do not recall problems with previous…
- Pobrania
- 268
- Polubienia
- 38
- Ocena
- 5
P
PrintablesChris
SCX24 or AX24 Shock Preload Spacers
A simple set of preload spacers that will fit the stock Shocks on your SCX24 and AX24 rock crawlers. These can be used to adjust the amount preload on your shocks, therefore adjusting ride height of your crawler itself. When used in the…
- Pobrania
- 242
- Polubienia
- 40
- Ocena
- 5
P
PrintablesUF_Icarus
Bicycle Fork Wrench (Preloader Wrench)
A tool used to remove the preloader from the shock tube of a bicycle fork. I decided to do some maintenance on my shocks and didn't have the tool I needed for it. This was one of those situations where my alternatives were buying a $10…
- Pobrania
- 179
- Polubienia
- 31
- Ocena
- 4,67
P
PrintablesSilencedFrost
Shaft F6-14M/F10-18M thrust bearing with preload
What problem does this solve you asked? Stepper motor shafts/bearings aren't designed to take axial load, but only radial load, so taking the whole weight of the gantry isn't their forte, they will wear down the bearings faster, create…
- Pobrania
- 175
- Polubienia
- 65
- Ocena
- 5
P
PrintablesJacktheTraxxasCre8or
TRX4m spring preload clips
These are preload clips like the ones that come with the TRX4m models. They snap right onto the shock body and can help accommodate for a heavier load or trailer or something by increasing the tension on the spring and decreasing the…
- Pobrania
- 134
- Polubienia
- 15
- Ocena
- 0
P
Printableskotana
CFMOTO 450MT / IBEX450 FORK Preload Adjuster
The fork preload adjuster for the CFMOTO 450MT / IBEX 450. It’s designed to fit very tightly, so you need to tap it in with a hammer during installation. Once installed, it stays in place securely unless it receives a direct hit. I’ve…
- Pobrania
- 127
- Polubienia
- 8
- Ocena
- 0
P
PrintablesVilnis
Spring Preload Adjustment Knob for Suzuki v-Strom 650 (2016)
Spring Preload Adjustment Knob for Suzuki v-Strom 650 (2016), For slicing added more top and bottom layers as well as vertical shells for added rigidity, printed in PETG, with supports, letters up, to increase front surface appearing.…
- Pobrania
- 85
- Polubienia
- 12
- Ocena
- 0
P
PrintablesHYPERFORMA
HYPERFORMA_Floatwheel ADV-ADVPro Split Slim Top Fender (5°-12mm preload)
INTRODUCTION These parts have an original design and are designed directly on the CAD model provided by Tony from Floatwheel . This top fender was created for all those who want to print the fender at home but don't have a large print…
- Pobrania
- 85
- Polubienia
- 7
- Ocena
- 0
P
PrintablesPatrick
Preload nut adjuster 14mm (fits perfect for CFMoto 450MT)
Print 100% infill, doesn't make sense to print hollow.
- Pobrania
- 80
- Polubienia
- 4
- Ocena
- 0
P
PrintablesErin Mc Loud
Ascent-18 Zero preload spring perch
Lower the ride height and soften the suspension on the Ascent 18 with zero preload lower cups. Print at.16 or lower from ABS, ASA, PETG, ETC.
- Pobrania
- 68
- Polubienia
- 7
- Ocena
- 0
P
PrintablesBasti37
Shimano crank preload tool
A Tool to tighten the crank preload bolt on Shimano Hollowtech II cranks. With a bitholder. (Second Variation without the bitholder is also available). For the bitholder you need two magnets with the size of 5x1.5mm. To get them in place…
- Pobrania
- 55
- Polubienia
- 6
- Ocena
- 0
P
PrintablesMonolith Tool
Preload Cap Tool for Shimano Hollowtech II Cranks
Not much prose for this thing. It's an easily printed Preload Cap Tool for Shimano Hollowtech II Cranks. 8mm hex for your convenience.
- Pobrania
- 52
- Polubienia
- 5
- Ocena
- 0
P
PrintablesJan Kurek
spring preload adjustment knob V-Strom
(CZ) Zjednodušená náhrada nastavovacího knoflíku zadní pružiny. Vytištěná ze dvou dílů a následně slepená acetonem. (EN) Simplified replacement of the rear spring adjustment knob. Printed in two parts and glued together with acetone.…
- Pobrania
- 42
- Polubienia
- 4
- Ocena
- 0
P
PrintablesDreamHazard
Saitek/Logitech X52 Spring Preloader - Large
Simple design for fast print - measured the spring and stick dimensions and designed the biggest compression block I could fit while still having movement in the spring and being able to fit the block over the stick. requires a bit of…
- Pobrania
- 34
- Polubienia
- 0
- Ocena
- 0
P
PrintablesSabre Design
PM-25MV / AMAT25LV / VM25LV / G0704 / spindle preload nut tools
Two Spindle tools to disassemble the spindle of your mill, big tool is for the nut/cover on the spindle nose and the smaller tool for the preload nut in the spindle. You will need 2x M4x25 bolts for the big tool and 2x M5x50 for the…
- Pobrania
- 32
- Polubienia
- 3
- Ocena
- 0
P
PrintablesJH3D
Indian Scout 101 preload adjustment tool
Measure the shock preload from the upper mount bolt center to the lower mount bolt center, eye-to-eye When you sit on your bike the preload should be 282mm. Its hard to see on your own sitting on the bike. This tool helps a lot.
- Pobrania
- 28
- Polubienia
- 1
- Ocena
- 0
P
Printableselectronerd
Bracket preload jig for MakerBeam XL
Make assembly of MakerBeam XL a little easier by pre-loading your brackets with bolts and nuts. Print instructions Print with whatever you have on hand. I used PETG only because that's what I happened to have loaded into my printer. To…
- Pobrania
- 23
- Polubienia
- 4
- Ocena
- 0
P
PrintablesDaTryhard22
Redcat Everest 10 Spring Preload Spacers
Here is a very basic model of the stock spring preload spacers from the Redcat Everest 10. You can use your slicer software to adjust the height to create custom parts for adjusting spring force and ride height on your crawler.
- Pobrania
- 20
- Polubienia
- 4
- Ocena
- 0
P
PrintablesDr. Stefan Lux
Suzuki DR-650: spring preload adjuster bracket (Schelle für Federvorspanner)
the spring preload adjuster of my son's DR-650 didn't really fit into the frame of the motorcycle without adjustments, e.g. removing the rear footrest. Therefore we decided to create a fixture / bracket to attach the preload adjuster to…
- Pobrania
- 18
- Polubienia
- 4
- Ocena
- 0
P
PrintablesCurlyJ
Preloaded nut stopper
The Story Once I completed the first corner joint of my Salad Fork build, I lifted the corner to inspect the alignment and listened with horror as 15 preloaded nuts bounced off a messy craft room hardwood floor and to parts unknown. A…
- Pobrania
- 16
- Polubienia
- 3
- Ocena
- 0
P
PrintablesMicko
Kyosho Mini Z Damper Spring Preload Clips
Kyosho Mini Z Damper Spring Preload Clips. Seen a lot of people using zip ties, which I wasn't a fan of so I created these in a variety of thickness. You can load 2 of these clips onto the damper to preload the spring and are easily…
- Pobrania
- 14
- Polubienia
- 2
- Ocena
- 0
P
Printablesssejrog
VEX Spin Up Preload Holder
VEX Spin Up Preload Holder Printable disc holder to make life easier for field resetters and competitors! Discs fit between the pegs in the print. Field resetters fill these until it cannot fit more discs. This makes it easier to field…
- Pobrania
- 11
- Polubienia
- 1
- Ocena
- 0
P
PrintablesR3NE07
Parametric Suntour Preload Cap - SF7 NEX 4000 - 25.4mm
Designed for a Suntour SF7-NEX-4000 Should fit most forks with 25.4mm stanchions if your measurements are: - Stanchion inner diameter: 22.4mm - Cap outer diameter: 23.2mm Design files are fully parametric to fit any fork at onshape :…
- Pobrania
- 9
- Polubienia
- 0
- Ocena
- 0
P
Printablesskvedo
Orbea Rallon 2018-21 linkage preload tool alternative (X426)
Original part is sloped washer to sit in link and create plane perpendicular to axle plus M15x1 screw. https://www.orbea.com/int-en/gear/spare-parts/X426TTCC Using M8 threaded rod and my model of washers to accomplish same. NDS side has…
- Pobrania
- 6
- Polubienia
- 0
- Ocena
- 0
P
PrintablesUmut Polat
Front Fork Preload Adjuster Knob for Honda Africa Twin CRF1000L (19mm On-Bike Accessory)
Tool-free, stay-on front fork preload adjuster knobs designed specifically for the Honda Africa Twin CRF1000L (2016-2019). These knobs press directly onto the factory 19mm hex preload nuts on top of the fork caps. Once installed, they…
- Pobrania
- 2
- Polubienia
- 0
- Ocena
- 0
P
PrintablesDan G
Motorcycle Fork Adjuster Knobs – Tool-Free Preload & Damping
Tired of carrying a wrench and a screwdriver just to tweak your suspension? These caps press onto your front fork adjusters and turn them into hand knobs. - Preload cap – fits over the 14 mm preload adjuster nut - Damping cap – fits the…
- Pobrania
- 2
- Polubienia
- 1
- Ocena
- 0
P
Printables
Honda - Fork preload cap
Fork preload cap for Honda CBR500R. The factory color is blue… so i designed a Cap for them and printet it in Black. Material: PAHT-CF Supports are recommended.
P
Printables
Kyosho Mini Z Damper Spring Preload Clips
Kyosho Mini Z Damper Spring Preload Clips. Seen a lot of people using zip ties, which I wasn't a fan of so I created these in a variety of thickness. You can load 2 of these clips onto the damper to preload the spring and are easily…
P
Printables
Africa Twin Preload Knob
A longer to knob, to make adjusting the rear suspension preload a little easier. Fits CFR1000
P
Printables
Voron Trident Z-axis mods for preloaded lead screw nuts
The original parts don't offer enough clearance to install preloaded nuts, so I made some modifications. I used the POM round nuts that can be found on AliExpress, T8 Anti-backlash Lead Screw Brass/POM Spring Nut.
P
Printables
LDRC Shock Preload Spacers - Fits WLToys Shocks
LDRC Shock Preload Spacers - Fits WLToys Shocks I made these for my LDRC 1899 RC and fit like a glove. 5mm Diameter. Will also fit WLtoys K989 and K969 RC's. Print 100% infill, no supports required. Enjoy!
P
Printables
Prusa MK3S MMU2S purge bucket for V6 and Volcano with internal adjustable preload Spring
Prusa MK3S MMU2S purge bucket for V6 and Volcano remix with internal adjustable preload Spring It's a remix from Forfelet https://www.prusaprinters.org/prints/50588-prusa-mk3s-mmu2s-purge-bucket-_new-version i redesigned the Parts for…
P
Printables
Honda - Fork preload cap
Fork preload cap for Honda CBR500R. The factory color is blue… so i designed a Cap for them and printet it in Black. Material: PAHT-CF Supports are recommended.
P
Printables
Saddle measuring tool with Shimano preload tool
Using for measuring saddle height from the center of BB. Maybe want to loosen the cap slightly just to get a perfectly straight line to the saddle. My favorite saddle offset tool is cmh's design .
P
Printables
Range Rover Classic RRC Swivel Ball preload tool
This is a tool to make it easier to set the preload for the swivelballs on a RRC/Defender/Discovery when doing a swivel ball replacement or larger service. Utilizes a 3/8" ratchet
P
Printables
Range Rover Classic RRC Swivel Ball preload tool
This is a tool to make it easier to set the preload for the swivelballs on a RRC/Defender/Discovery when doing a swivel ball replacement or larger service. Utilizes a 3/8" ratchet
P
Printables
Voron V0.2 umbilical support (without needing preloaded nuts)
As the name suggests, this remixed design doesn't need preloaded nuts
P
Printables
M18 Crank Preload Bolt
Created because I could not find bolts at sizes smaller than M20 (standard shimano).
P
Printables
Suntour MTB Fork Preload Knob Removal Tool
A tool to remove the preload adjustment knob on Suntour mountain bike suspensions like the Suntour XCT V3
P
Printables
Honda Rear Shock Preload Adjustment Wrench
I've been wanting to adjust my VTX1800's rear shocks for a while and had the bags off this weekend. Instead of waiting for a $20 wrench to ship from amazon I made one. I measured the shock diameter at roughly 68mm +- 15mm. It doesn't seem…
P
Printables
PLA-compatible, preloaded bag clip
There are many bag clip models available, yet none completely met my needs. Some are only PETG-compatible, while others compatible with PLA quickly lose their strength. Additionally, issues like sharp edges, the need for supports, or…
P
Printables
PRELOAD SR SUNTOUR CAP
TAPA PRECARGA DEL RESORTE CON ESPACIADOR PARA ENDURECER LA COMPRESION SPRING PRELOAD CAP WITH SPACER TO HARDEN COMPRESSION
P
Printables
22mm Motorcycle Fork Preload Adjusters
22mm Motorcycle Fork Preload Adjusters A very easy Way to adjust your spring compression for different road types
P
Printables
Medium Carabiner (Not for Climbing) 15deg Preload
I liked ICBB's carabiner design, but I found the gate to be too loose. I solved it by adding 15 degrees of preload.