1 / 1
Shaft F6-14M/F10-18M thrust bearing with preload — zdjęcie 1

Shaft F6-14M/F10-18M thrust bearing with preload

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An anti-dust and alignment casing for F6-14M thrust bearings, lift that load from your motor!

Ocena
5 / 5
Polubienia
65
Pobrania
175
Wydruki
7
Wyświetlenia
1389
Oceny
6

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

What problem does this solve you asked?

Stepper motor shafts/bearings aren't designed to take axial load, but only radial load, so taking the whole weight of the gantry isn't their forte, they will wear down the bearings faster, create slop, and ones that have a preload spring, will have inaccurate z movements due to constant abuse.

How to solve this? add a thrust bearing, they are designed to withstand axial forces. Now that the load goes through the coupler, down to the solid motor face plate, along with thin TPU spacers for preload force on the bearing, making sure they always work and support the full weight.

This preload spacer is different from the motor's shaft preload spring, the shaft preload is there to keep the rotor in place, not taking heavy axial loads.

🤩 Do you like the design? You can help fund innovations like this!
Consider supporting me!
Much appreciation given to my supporters, and you get exclusive access to various CAD files!
Submit feature requests here!

Features:
- TPU preload to ensure 24/7 operation (optional)
- Avoids dust by having a downwards lip
- Auto align with the shaft

Recommended print settings:
- Nozzle diameter: 0.4mm
- Layer height: 0.2mm
- Infill: 100%
- Print orientation: as imported
- Supports: none

Recommended materials:
- PETG
- ABS/ASA
- Any heat-resistant materials as the motor can get hot!

Installation requires:
Buy here - F6-14M/F10-18M thrust bearings
- Drown that bearing in lithium grease! (ngli2-3, no solids)
- Make sure to “preload” the bearings by pushing down on the coupler while tightening it!

Changelog:

Official releaseChangelog

v5

August 2 2024

First official release

v6

August 28th 2024

Added support for F10-18M bearing

Pros: Grease seal, no more leaking grease

Tagi