Honda Rear Shock Preload Adjustment Wrench
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I've been wanting to adjust my VTX1800's rear shocks for a while and had the bags off this weekend. Instead of waiting…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 317
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I've been wanting to adjust my VTX1800's rear shocks for a while and had the bags off this weekend. Instead of waiting for a $20 wrench to ship from amazon I made one. I measured the shock diameter at roughly 68mm +- 15mm. It doesn't seem too critical. Then I checked a 5mm bolt I happened to have to see if it would fit the pin holes. Attached are photos of the finished product and the shock I was adjusting. It worked like a charm. Don't forget to unload the weight from the rear tire. I just pushed on the sissybar a bit lifting it on the kickstand and the shock slipped right up to the next preload setting.
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Mk2
Rafts:
No
Supports:
No
Infill:
20%
How I Designed This
I designed this in about 15 minutes in Autodesk Fusion 360.
Category: Hand Tools