Honda Rear Shock Preload Adjustment Wrench
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I've been wanting to adjust my VTX1800's rear shocks for a while and had the bags off this weekend. Instead of waiting…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 21
- Makes
- 0
- Views
- 317
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
I've been wanting to adjust my VTX1800's rear shocks for a while and had the bags off this weekend. Instead of waiting for a $20 wrench to ship from amazon I made one. I measured the shock diameter at roughly 68mm +- 15mm. It doesn't seem too critical. Then I checked a 5mm bolt I happened to have to see if it would fit the pin holes. Attached are photos of the finished product and the shock I was adjusting. It worked like a charm. Don't forget to unload the weight from the rear tire. I just pushed on the sissybar a bit lifting it on the kickstand and the shock slipped right up to the next preload setting.
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Mk2
Rafts:
No
Supports:
No
Infill:
20%
How I Designed This
I designed this in about 15 minutes in Autodesk Fusion 360.
Category: Hand Tools