Motorcycle Fork Adjuster Knobs – Tool-Free Preload & Damping
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Snap-on knobs for motorcycle fork adjusters. Change preload, compression and rebound by hand, no tools needed.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 11
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Tired of carrying a wrench and a screwdriver just to tweak your suspension?
These caps press onto your front fork adjusters and turn them into hand knobs.
- Preload cap – fits over the 14 mm preload adjuster nut
- Damping cap – fits the flat-head (slotted) screw for compression and rebound
- Easy to print, easy to install
- Tight fit, no glue needed
PRINT SETTINGS
Material: PETG
Layer height: 0.2 mm
Walls: 4
Infill: 15–30% gyroid
INSTALLATION
The fit is intentionally very tight. The preload cap presses on by hand.
The damping caps need a gentle tap (a rubber mallet works best) to seat on the screw.
Tolerances vary between printers, so print one test piece first.
COMPATIBILITY
Check your adjuster sizes before printing. Tested on: QJ MOTOR SRT600SX