Simple Pocket Operator Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple snap-on cover for the great Pocket Operator case. I needed something basic to cover up the buttons so they…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 670
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution
A simple snap-on cover for the great Pocket Operator case.
I needed something basic to cover up the buttons so they wouldn't get pressed in my bag. It ain't complicated but it helps a ton. The knobs stick out the front, but hey, the batteries stick out the back. Don't believe any battery will get wasted from the knobs turning but I could be wrong.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
0.2mm Layers
Filament:
Amolen PLA
Marble-like
Notes:
If you're printer can handle it, I recommend printing it upright on the edge to reduce or eliminate using any supports. Try out a brim if it won't stick on its own.
I printed it vertically with supports to fill in the potentiometer holes, but I bet it would be fine without.Category: Music