Prusa Mini Camera Stand and Front Plate (Updated)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prusa Mini Camera Stand that replaces the front plate of the printer. Now printable on the Mini and with hex pattern.
- Ocena
- 4,5 / 5
- Polubienia
- 54
- Pobrania
- 141
- Wydruki
- 4
- Wyświetlenia
- 1903
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This is my new and improved camera mount for the Prusa Mini. The idea is to have a permanent mount for my webcam to support octopi and octolapse.
The previous version had a few issues that this one solves. First this one can now be printed on the mini. It prints in two main parts. Second this version has an improved camera location giving a better view of what's going on. And finally this version also looks cooler! I added a hex pattern to fit the overall Prusa theme.
Like the previous version it has wire tie locations to route the webcam wire. They are compatible with the wire ties included with the printer. It also uses a standard ¼ 20 tripod screw. (It's a bit tight getting the screw threw, but if you get one with a gap that allows the screw not to fall back out)
The camera mount also works well with the popular Prusa Mini Base!
I added print files for the inserts that print the words "Original Prusa Mini" as well as for the orange hex inserts. I super glued them in/on the front plate.
Here's an example of the view from this location: