bike lamp mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Some years ago I got quite a decent headlamp (led lenser seo 5) gifted from my sister... which I rarely ever used due…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 465
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Some years ago I got quite a decent headlamp (led lenser seo 5) gifted from my sister... which I rarely ever used due to no apparent demand for a headlight. But recently I was acquiring an old bicycle (puch clubman), which suddenly made me wish for a decent bike light and that's when I remembered that headlamp.
So I ended up with printing an adapter that holds the lamp with some clips in order to make it detachable when leaving that bike unattended.
That's all there is to say; it's a very specific thing made for this specific bike and headlamp. I have no idea if it will fit any other handlebars (semi-likely) or other headlamps (not-at-all-likely). Anyway; I had fun designing and testing it - with just one time almost destroying the headlamp on some early protoype - so why not upload it?
Additional hardware required:
2x M3 nuts
2x M3x8-10 screws
Print Settings
Printer Brand:
Wanhao
Printer:
Duplicator9
Rafts:
No
Supports:
Yes
Resolution:
200
Infill:
35
Filament: 3dprima PA12 GF20 natural
Notes:
There are several orientations possible printing it, but I recommend lying it flat on it's backside with some supports where needed. That small counter bar works out best sideways.
Material-wise I used fiber-filled nylon for toughness reasons and to keep the springs elastic enough. It's probably not the best at resisting the UV light but let's see how long it'll last.Category: Sport & Outdoors