Multi color SpaceX Coaster
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of the original model in Thingiverse (thing:3222915 ).
- Ocena
- 5 / 5
- Polubienia
- 44
- Pobrania
- 199
- Wydruki
- 4
- Wyświetlenia
- 1016
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
This is a remix of the original model in Thingiverse
(thing:3222915 ).
I changed the height of the bottom of the honeycomb cells pattern in respect to the base of the X to do a color change in the SpaceX logo.
There are 2 versions of the same model, one with 0.2 mm of separation and other with 0.4 mm.
Print instructions
If you select to print this coaster via the .gcode files I recomend you to go to the user User print files section, there are all the variations I made.
The difference of every file is
- The space between the bottom of the X and the bottom of the honeycomb pattern
- The number of layers of the filament change
- The layer height
If you select to use the stl files. you only need to add a filament change 2 or 3 layers under the top layer of the stylized X, then add a second filament change just in the layer above the X
Colors Recommended
1.-Black
2.-White
3.-Black