Multi color SpaceX Coaster
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remix of the original model in Thingiverse (thing:3222915 ).
- Rating
- 5 / 5
- Likes
- 44
- Downloads
- 199
- Makes
- 4
- Views
- 1,016
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
This is a remix of the original model in Thingiverse
(thing:3222915 ).
I changed the height of the bottom of the honeycomb cells pattern in respect to the base of the X to do a color change in the SpaceX logo.
There are 2 versions of the same model, one with 0.2 mm of separation and other with 0.4 mm.
Print instructions
If you select to print this coaster via the .gcode files I recomend you to go to the user User print files section, there are all the variations I made.
The difference of every file is
- The space between the bottom of the X and the bottom of the honeycomb pattern
- The number of layers of the filament change
- The layer height
If you select to use the stl files. you only need to add a filament change 2 or 3 layers under the top layer of the stylized X, then add a second filament change just in the layer above the X
Colors Recommended
1.-Black
2.-White
3.-Black