Tusk Fan Duct for Bondtech BMG and E3D V6 with 40mm Blower Fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a fan duct I designed based of the Tusk Part cooling fan idea by SublimeLayers.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 1296
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a fan duct I designed based of the Tusk Part cooling fan idea by SublimeLayers. I modified it an built a version strongly inspired by the one from cdoe.
This duct is using a 40mm blower fan and 2 pieces of 4mm (OD) brass tubing. It's working great so far - maybe I will make a different version vor a stronger 5015 blower fan.
I also provided the f3d and stp file.
Print instructions
Category: 3D Printer Parts Print Settings
Printer: CR-3D C1
Rafts: No
Supports: No
Resolution: 0.2
Infill: 15%
Filament: dasFilament PETG schwarz
Notes:
Turn on "thin wall detection" for this print. The top part, which "seals" the fan and duct is only 0.45mm thick (or thin).