Dr. Brown's Baby Bottle Caddy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
We needed a place to keep bottles, and parts. Here's my solution. I hope it helps other new parents.
- Ocena
- 3 / 5
- Polubienia
- 54
- Pobrania
- 158
- Wydruki
- 0
- Wyświetlenia
- 2371
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
It didn't take having a baby long before we realized we needed a better way to deal with all of the baby bottle, and assorted parts. Behold my sleep addled mind's solution to the problem.
I couldn't find anything else like this anywhere so I hope this helps other new parents that find themselves in a similar position.
The original was printed in PETG with .6mm nozzle. It took about 48 hours to print at .4mm layer height and consumed 3.5kg of filament.
Please note that given the size of the model it's been broken into 5 pieces all of which can be printed without supports. Fasteners are required. You'll need 12 screws or 12 M3 x20 (or longer) as well as 3 M3 x40 screws.