4x6 Label Printer Stand [for large label rolls]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed this label printer stand to hold the LARGE label rolls I bought off Amazon. Intended for a Munbyn 4x6 label…
- Ocena
- 5 / 5
- Polubienia
- 56
- Pobrania
- 439
- Wydruki
- 4
- Wyświetlenia
- 2854
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
Remixed this label printer stand to hold the LARGE label rolls I bought off Amazon. Intended for a Munbyn 4x6 label printer, but should work with Rollo and other brands. Added diagonal support to the corners, a lip around the back and sides, and split the roller into two pieces that combine with a peg and some super glue.
DEFINITELY USE A BRIM!!! The corners will almost certainly lift on this 18hr print.
Draft (.3mm) settings in PrusaSlicer, printed on a MK3 with PLA. Make sure to print two of the roller halves and one peg.
Add some rubber feet to the bottom to prevent sliding.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
No
Resolution:
.3mm
Infill:
15
Filament: Inland PLA
Category: Office