204 modeli
Just a few stands for the special events cards. I found that sitting flat on the tree they were harder to read. These keep the 66x44mm cards upright, but are small enough not to block the text. Any filament will do, and you will need a…
Collection of screws (ISO 4762 / DIN 912) including : M4x 6, 8, 10, 12, 16, 20, 25, 30 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I would recommend…
Collection of screws (ISO 4017 / DIN 933) including : M4x 6, 8, 10, 12, 14, 16, 20, 22, 25, 30, 35, 40 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I…
Tried to create something that can be used outdoor. Honeycomb structure is intended to stop raindrops and additional grid should prevent insects from entering throuch holes or nesting in honeycomb. Internal 3x3 net is separated from…
The whole model uses about 90 grams of filament. I do 15% infill, Snug supports along the interior of the frame, no supports on the holes on the back of the frame fillets down on the picture backer. I also use .1mm layer heights to keep…
Based on the design from @Kittelot and trimmed in order to fit on the Prusa Mini. I also removed the center of the backing in order to save on material since it was not required. It fits 4x6" photos nicely! Print Settings: Print with…
Designed for the Apache 1800 case, for one NVX® NSP46 4" x 6" driver. .step files are included if you wish to mod them for different drivers. The outer trim requires 6 m4 heat set inserts, and is mounted with 6 m4x8mm screws. The jig has…
A simple 4x6 picture frame. My daughter needed a picture frame for a school project. Nothing too fancy, just glue or tape the picture into the frame.
7inch HDMI LCD (H), 1024x600, IPS, supports various systems, capacitive touch, supports Raspberry Pi 4. looks good and protected. Display link to Buy:…
Collection of screws (ISO 10642 / DIN 7991) including : M4x 6, 8, 10, 12, 16, 20, 22, 25, 30, 35, 40 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I would…
Remixed this label printer stand to hold the LARGE label rolls I bought off Amazon . Intended for a Munbyn 4x6 label printer, but should work with Rollo and other brands. Added diagonal support to the corners, a lip around the back and…
I am so excited about this! I was so tired of my messy fridge and the random magnets to hold up the little photos I wanted on the fridge, so I came up with this simple design. Holds 4 - 6mm magnets. If you have different magnets you want…
You are going to need to go slow and keep the breeze off the print or it will warp
I used the presets with supports on build plate only. I included a color change
64x64 LED Matrix Grid If you're printing yourself don't use this model!: This is is a really really slow path to printing these since slicers aren't optimized for grids like this. A better option is: Create a 192x192x6mm solid box (or…
Designed to hold 3 64x64mm sleeves condoms so they stay protected in your pocket I included my freecad original files if you want to modify or improve this model Printed at 0.3 layer height Have fun and stay safe !
Designed for the Apache 1800 case, for one Polk db462 4" x 6" driver. .step files are included if you wish to mod them for different drivers. The outer trim requires 6 m4 heat set inserts, and is mounted with 6 m4x8mm screws. The jig has…
Inspired by the iconic Han Solo in carbonite scene, I designed a series of custom LEGO-style minifigures that appear frozen in carbonite. Each figure is a unique alien character, combining elements from various open-source models shared…
case for 7 inch 1024x600 IPS touchscreen and raspberry pi 4. case uses m2 screws to hold everything together.
These fit the Hobby Lobby 4x6 photo cases. I use these to store small board and card games in. Sometimes you need a little organization. They print quickly and don't use too much material.
Acoustic panel mounting bracket for threaded heat insert M4x6x6. For panel size, 13mm width, 10 mm height. Adjustable. FreeCAD 1.0 model provided. Adjust to match your acoustic panel width and height. Also adjust to fit your threaded heat…
A cabinet enclosure for 64x64 LED matrix (3mm pitch) with Adafruit controller. The enclosure is suitable for wall mounting. PLA-ST & organic support.
In need of a desktop holder and display for flash cards or index cards? Look no further! This model was originally intended to hold a pack of 50 dry erase flash cards, with one set in front to display its content. This makes it a perfect…
Link for the screen: https://www.aliexpress.com/item/1005001704445373.html Infill: 20% Filament: PLA, PETG, ABS … Wall thickness: 3. Support required.
I had a 5x7 photo frame I wanted to use, but only had 4x6 photos, so I made this simple model. I didn't see other models like this, so I figured this was worth sharing as inspiration. Someone more artistic than I could add different…
After purchasing an iDPRT 4x6" thermal label printer on Amazon, I quickly became annoyed by how messy the stack of labels got sitting off behind the machine as there was no included organization with the printer. They sell a separate bin…
Photo frame for 100x150mm photos printable with vase mode.
Remix of @RinoaLilieu_609203 cell holders. I made the gap between the cell contact and the bottom of the holder much smaller, so nickel strips for spot welding will make much better contact.
Customized version of https://www.thingiverse.com/thing:48235 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing\_id=48235 Print instructions Category: Organization Instructions Using the following options:…
Easy to print pencil holder. Printable without supports. Nut is optional. Size cca 110x110x120 (mm)
Requested by Zitheran on Discord. Magnet holes use straight bridging method and should be friction fit. https://www.printables.com/model/379547-gridfinity-magnet-holes-model-for-example-and-tink
Customized version of https://www.thingiverse.com/thing:48235 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing\_id=48235 Print instructions Category: Organization Print Settings Printer Brand: Prusa Printer:…
This stackable organizer tray is 130mm x 185mm x 35mm (~5" x ~7" x ~1.5") and is designed to hold the drop-off package receipts you get from places like UPS. Designed, so no supports are required!
My remix allows you to mount the display without interfering with the printer's structure. The display bottom cover has channels for cable clips. Same with 2 chamber plates. Additionally, there is an 8mm hole for passing the webcam cable…
This is a 3x4x6u Gridfinity Bin for a Niimbot D11 Label Printer and three spare label rolls. Also, it's my first model... please be gentle! This remixes the Plain Bin (3x4x6) from @KyleWarren (my absolute favorite Gridfinity bins to…
Simple design to give 4x6 photos a thin border frame. Photo is inserted from a top slot and sits snugly. For printing: Orient with slot facing upwards (so it's standing straight up) Have a brim/raft since they are so thin Paint on…
Frame is divided to 5 parts: - (blue dark and light) 2 corners (you need at last 2 + 2 of it) - (pink and red) edge+side, for edge connecting every two panels, - (yellow) cross, for center connection (when you make more than one row of…
Dumpster Inspired Recipe Box (4x6 cards) This is the first file I've uploaded to Printables! Dumpster inspired recipe box with hinge lid. All original custom design built in OnShape. Groove in lid props up recipe card at the perfect…
Finder Mask for framing 24x68 format images with the RZ67. Works with waist level or RZ67 AE prism finders. Printed in PETG and 0.15mm layer height with a 0.4mm nozzle.
This is a negative volume model to use with all the great models for game inserts that were built for older 4x6 photo keeper cases. Easy to apply within the PrusaSlicer and 3D-Builder. As of 2024, all the available photo storage…
This is a housing for a 64x64 LED panel common on the elektronic market with enough space for powersupply and the IoT control unit. Here is used to display temperature and whirlpoolstate of a HotTub. The display is conrolled by a Raspian…
My grandfather was always meticulous about his lawn. My grandfather was known for being strong, dependable, honest and loyal. He was well known for arriving at least 30 minutes--more often an hour--early for any planned event. He was…
The trim pieces can be printed in a different color from the backing if you wish, since they are separate pieces. Just use CA glue to join the pieces together and then (when dry) slide the picture into the thin slot on top. If you use the…
you can use vertical or horizontal picture frames. To puncher letter Use Creality Print or any other software you like.
Case for 124x64 2.42" OLED display powered by ESP32 D1 Mini Use 2 mm screws.
Uploading for personal use. Currently has errors (invalid oriented triangles). Not finished.
mirror bot_nomal, pro_micro_adapter for left, right mouse sensor using ADNS9800 need 50 switchs, diodes, hotwaps ( kailh, gateron or something else) firmware is QMK, can use Promicro atmega32u4, blackbill stm32f401, RP2040.... Ball is of…
The lab where my wife works got a new automated pipetting machine, and the tube rack that is available for that machine is apparently a nightmare to use. I made this version for her based of the design used in another machine. The rack is…
Simple 64x64 matrix holder with integrated open case for an ESP32 with some holes for wiring, cable ties and 3 wall hanger holes for nails or screws. Printing instructions: 0.3 draft profile No brim or supports used Steel Sheet used Happy…
I wanted to fit some 4x6 lights i had on hand to my 92 Toyota with 5x7 or 6054 sealed beams. These are adapters with no retention currently because i had planned to epoxy the 4x6 inside them. I will release a version with bolt on…
This is a simple 4x6 picture frame made to hang on the wall from a standard drywall screw.
Label Tray, box and clip for 4x6 thermal postage labels. Use STEP files for best speed and quality. All of my functional 3D models are available on Thangs.com https://thangs.com/designer/PILED Visit https://piledltd.co.uk/ for more
Printed grill down, with minimal supports. Printed spacer with case side down with minimal supports.
Gridfinity 1X4X6 filed box modified to hold long cotton swabs. Part of a set of several items I modified to better organizer my firearms cleaning supplies.
Housing/Wallmount for Waveshare 64x64 LED-Matrix and Raspberry Pi/Zero The Waveshare LED-Matrix can be screwed to the Wallmount and covers the Raspberry Pi inside. You can either use Raspberry Pi 1, 2, 3, 4 or a Raspberry Pi Zero. On the…
Headlight trim ring for a 4x6" sealed headlight. This is the bracket that holds your sealed headlight in place against the bucket. There is some room for error in the corners to compensate for small variations in the glass of the…
This is a tray to hold the 4x6 labels that are used for my Jiose thermal label maker, but it should work for any 4x6 inch labels. Prints flat without supports.
I made this tray because I did not have space where to store my PCB's before and after assembly. You can store PCB in panel or single PCB and you can stack them if you need. Is easy to print, without supports. Print instructions Printer…
Case for LED matrix 64x64 P3 and ESP8266 (Lolin v3) Print Settings Printer: Custom CoreXY Rafts: No Supports: No Resolution: 0.2 Infill: 25% Filament: Jupiter PLA Clear Category: DIY
A frame for two Adafruit 32x64 P5 RGB LED Matrices , controlled by the Adafruit RGB Matrix Hat . Wanted the frame to stand on it's own, so added two feet. The frame holes are M3 and Raspi standoff holes M2.5. Tolerances are a bit tight,…
I had a multi-photo frame that broke, but the glass pieces were still good. I designed these frames to hold those glass pieces; they measured 170mm x 111mm in size. No supports needed for printing when laying them out flat. I printed in…
My printer doesn't like the magnet holes, and I printed a magnetless Gridfinity. Whipped this up with the use of the Parametric Web Generator. Please excuse the dirty bottom, it printed very clean, but I had glued my print surface so it's…
A conversion of a Praktica B camera to 24x65mm format. This is not a straight forward kit, see it as a starting point for your own conversion. Print Settings Filament: any kind PETG black Category: Camera First light
Should be printed with supports. I used black bambu labs matte PLA on stock 0.2 settings
A 1x4x6 gridfinity for a wera 1013 bit holder and 14 bits. Bits can be a little tricky to remove as there is not all that muck space in the 1x4 bins. I printed my model mirrored.
An Ikea Skadis bin that holds the 4x6 inch Post-It notepads. It will hold a pack of 5 notepads before going over the top edge. The hook used is the original IKEA SKADIS Universal Hook Set by CSD_Salzburg…
Hello Tribe, Shhh... We are working on a movable power unit box for 12v dc motors. please enjoy Oh side note both the bottoms are the same one just has some text on it. Here is our Sunlu Affiliate link…
Stand/holder for the large 4x6 label rolls with 3" ID core you can request from UPS/Fedex for free. Designed to mount on top of iDPRT SP410/SP410BT but also included a flat base version. You need to print two of the rollers, one for each…
10″ Rack display holder for 7" HDMI Display ( USB Touch / 1024x600 ) FreeCad-File attached.
Didn't have any 4x1.5mm magnets on hand (and didn't want to buy more magnets every time there's a design to print, so I modified it to fit the magnet sizes that I had (4.6mm cylindrical magnet).
A very minimalistic picture frame for 4x6 (100x148mm) pictures. It has multiple mounting holes for pins or nails, depending on if you want to mount it portrait, landscape, at a slight tilt, as a chain, etc. The Frame uses barely any…
The idea is to separate each pixel into it's own "box" this in combination with a diffuser sheet or transparent paper, gives a nice “boxed” effect for each of the 4096 led's. Beware you are not going to print the object, you are going to…
Star grill for 4x6 grill assembly with no tweeter cutout, meant to replace the grill on my nvx 4x6 grill assembly.
I needed a quick and effective method of storing my 4x6 prints. This should do the job well. I recommend printing with black filament so you won't get any fading of your prints. It should be strong and resist breaking and bending. Also…
I made a simple panel for mounting a 7-inch screen on my Rackmate T2 case, at least it can hold my screen now. There will be minor modifications later, hope everyone likes it. Change Logs: V2.0 adding FPC slot, adding more space for…
Speaker grill for Apache 1800 case from Harbor Freight for use with an NVX NSP46 speaker or Polk 4x6. It may fit others as most of the 4x6 speakers have quite a few mounting holes but this is the only speaker that I've tried it with.…
After failing to find a reliable 3D-printable bracket online, I designed this from scratch. Standard design rely on a plastic spring-clip lock, which is inherently fragile when FDM printed. This design solves that problem by using a…
Case for a 7" touchscreen. The one I bought is from Amazon.ca: https://www.amazon.ca/gp/product/B075QCXLPF and seems similar to this one: https://wiki.52pi.com/index.php?title=EP-0087 but without the camera. The case allows full access to…
I have most standard sizes of Speed EZ EL for my darkroom. For those unfamiliar, instead of a single easel with adjustable blades to change your print size and border thickness, a Speed EZ EL is a fixed, standard size (such as 8x10) with…
Gridfinity holder 1x4 for Xiaomi/Redmi PB200LZM ( 20000mAh) powerbank Thanks for your likes ;-)
Dies ist ein Tischständer für die Waveshare 64x64 RGB Matrix. Ich betreibe mein Display mit einem Interstate 75. Da gibt es aber auch 1000 andere Möglichkeiten. Deswegen ist die USB-Variante eine Option. zusätzliche Teile: 4 M3…
Enclosure and desktop stand designed to fit this specific touchscreen HDMI display from AliExpress. From what I can tell the model number is MPI7010. The display fits nicely in the case, and it feels solid when put together. Assembly just…
Description Picture size 4x6in (10cmx15cm) and 1mm gap between two parts of the frame for your photo These are frames that can be joined together in groups of three or more according to your wishes. I made 5 different types as you can see…
You will need 4 of the .5 inch/12.7mm magnets for this project. I got mine at Michael’s.
I really like 3D Printy's Twist Lock Presents for gift giving. However, I need to fit photo prints inside and they were not big enough. Since they were generous enough to provide the step files, modifying them was simple enough! I also…
This is just one box of a bigger system with more than 160 variants in size and partition. Find the whole overview here. Stackable: three thirds/two halves make one full height All dimensions shown in the linked overview above compatible…
4x1 through 4x6 base grids. The most important thing is to make sure your magnets have the same orientation throughout the whole system. More about the FreeGrid system and FreeCAD tools to build your own modules is available on…
As I am using my LED Matrix Panel as a display for cover art via HomeAssistant, I wanted a stand for these panels which can also hold the cover of any record I am playing right now. Also, I added some additional holes needed for my type…
A flat bin to stow away a gluegun, with room for a couple of gluesticks.
This is just one box of a bigger system with more than 160 variants in size and partition. Find the whole overview here. compatible with Sortimo/Bosch/Auer/Allit EuroPlus Insert 63/others in size many variants available, see the link…
Summary This is a simple, straightforward housing for a 64x64 P3 HUB75 Matrix (192mm x 192mm) . I designed this to fit my own needs and wanted to share it in case it helps anyone else! Design Features Two Versions: Includes one version…
Update v3: I had a few boxes that varied in size so i reduced the outer dimensions by 0.5 to 1 mm on all 4 corners to make the fit a little better. Update v2: adds a ridge to the center of the card holder to make it easier to grab cards.…
A simple case for 2 32x64 4mm pitch LED panels, and a Matrix Portal. Panels: https://www.adafruit.com/product/2278https://www.adafruit.com/product/2278 Matrix Portal:…
Improved upon Heartman's design by adding the ability to add label and cutout panel to the back of the box, for power input, audio in or power button. Of course you can customize this design for bigger box just like Heartman's When…
This modeI i made it myself, as you can see i have no skill in 3d arts but it gets the job done. You have to drill the holes for the main board, or you can use double sided tape. I used Double sided tape to attach the screen to the base…
Simple and modern 4x6 picture frame. Hangs in 2 orientations. Add a Glass insert, place the photo, snap on the back, voila! Assembly video below. Printed on an smooth effect plate to give it that pop you see in the photos Assembly:
BOM: Printed with ROSA3D PLA-Silk Steel Tired of loose batteries rolling around in drawers? Keep your AAA cells neat, organized, and easily accessible with this compact storage solution. Designed for maximum efficiency, this organizer…
Customized version of https://www.thingiverse.com/thing:1741072 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing\_id=1741072 Print instructions Category: DIY Instructions Using the following options:…
fits my REXBETI branded staple remover
![4x6 Label Printer Stand [for large label rolls]](https://media.printables.com/media/prints/204835/images/1883318_8a3e5ad3-9b6a-47c2-9ba5-8687c8527adc/large_display_screen_shot_2021-08-16_at_34145_pm_.png)
