Everdell Special Event Card Stands - 44x66mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A few little stands for the special event cards in Everdell, and other 44x66mm cards.
- Ocena
- 4,929 / 5
- Polubienia
- 234
- Pobrania
- 1828
- Wydruki
- 16
- Wyświetlenia
- 7950
- Oceny
- 14
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Share Alike
Just a few stands for the special events cards. I found that sitting flat on the tree they were harder to read. These keep the 66x44mm cards upright, but are small enough not to block the text.
Any filament will do, and you will need a tiny support for the end of the mushroom. You may need to run an xacto knife through the slot in case there are any blobs or strings.
Update: 2023-02-25: Added the Hedgehog stand!
Also, if you have the Everdell Complete Collection, here's a set of token containers for it:
https://www.printables.com/model/298782-everdell-complete-collection-token-containers