Liczymy pasujące modele…
Just a few stands for the special events cards. I found that sitting flat on the tree they were harder to read. These keep the 66x44mm cards upright, but are small enough not to block the text. Any filament will do, and you will need a…
Einfacher Wandhalter für 1-5 66mm Spraydosen. 12.06.22 - Adapter für 33mm Dosen hinzugefügt. Simple wall mount for 66mm aerosol cans. 06/12/22 - Added adapter for 33mm cans.
Previously to everything else, if you would need an adpated Version, like different Panel Size etc., just DM me and i might adapt and add it. (TBD) Modded back pieces for Umbilical Passthrough (06.09.2024) Screwable Retainer Lid for the…
This model is designed based on certain versions of the M72 LAW and has been modified specifically for 3D printing. As a result, there are differences in appearance and dimensions compared to the real one. The difficulty of assembling…
I was able to remix of the beer bottle helmet for FDM printing ( https://www.printables.com/model/236264-beer-bottle-helmet-insect-protection-bierflaschenh ) and I love the design, Now I was faced with the ban of glass bottles on my…
Halterung für Storz-C Kupplungen mit möglichst kleinem Durchmesser. Die Führung Innen ist nötig, damit sich die Kupplung nicht verkantet. Alternativ kann außen ein Führungsring genutzt werden. Dieser würde jedoch beim Druck mehr Probleme…
Material Prusament PLA Printer Bambu Lab 1XC / AMS 4 color Nozzle 0.4mm Slicer OrcaSlicer 1.6.3 Quality 0.20mm Standard @ X1C Quality only one Wall on first Layer (looks better in multicolor) Support yes, PETG as Supportinterface with…
Common Settings: TPU 95a (Sunlu) 0.16mm Layer Height 4 Walls 7 Top/Bottom Layers Gyroid Infill Foster Slug (66mm X 115mm): 0-80mm 8% Infill 80-95mm 35% Infill 95mm-Top 65% Infill Stackable Slug (66mm X 67mm): 0-35mm 8% Infill 35-45mm 35%…
Was looking for a top hat that could accommodate the ERCF V2, and was not able to find any. I have modified this one to suit. EDIT 8/7/2025: Have added holes for heat sets to allow for panel clips.
These are models for a 3d printable rail guide designed to work with 6mm carbon fiber tubes between two sets of guides. There are heat set insert holes for screws to retain a spring to increase separation force. There are models for both…
Fibonacci256 is a beautiful 166mm circular disc with 256 WS2812B RGB LEDs surface mounted in a Fibonacci distribution. Fully open-source software, and programmable over Wi-Fi or micro USB cable. Buy from Evil Genius Labs:…
Hier habt ihr einen AC infinity Temp sensor halter für die Homebox q100 (21.66mm durchmesser) Das kabel sitzt sehr fest und kann auch kopfüber angebracht werden und sich so sehr leicht & schnell höhenvertellen. Ich habe es gedruckt mit…
A remix of a pole mount for 150-100-70mm weatherproof boxes. Mine had slightly different hole spacing (117mm x 66mm). If you, like me, have issues with ASA dimensional inaccuracy even in an enclosure, try printing at 101% scale. I printed…
300mm remix with reinforced 2020 rail mounts. Edit 2025-02-03: -added step file for 2020 mounts -added 2020 mount models in 3mf with 0.5 and 1mm larger tolerances for the 2020 extrusion by request. (Untested) -added 2020 mount tolerance…
For buck converters which are 66mm x 36mm. I tried some other enclosures but the holes didn't line up. These dimensions may be more rare than others. Lid should stay on with a press fit. For the tiny voltage knob I recommend heating the…
Resized2 (40x66mm PCBs) version if the LED clock project of @imeszaros. For more details please check the github fork repository: https://github.com/mariusmym/LedClock-Resized Please keep in mind that files uploaded here are for the…
The model features 2.4mm thick walls, making it suitable for printing with 0.4mm and 0.6mm nozzles. It was designed entirely from scratch! Inspired by: [Thingiverse Design](https://www.thingiverse.com/thing:4878747) Since I required a…
Highly recommended to print with PETG, but if you only have PLA, I've included some notes below. Print on side as shown. Jar may slide down and rest on brim if heavy enough. Might benefit from some tape on the inside of the clamp to add…
repo is still a work in progress I was asked by a few members in the BoxTurtle community to design some mounts for their Voron 2.4's which use Luc1luc Tophat design Link:…
Model with true aspect ratios. Ideal for hanging on the wall, all in one piece. 200x3mm. Collect all the CarSilhouette!
This is the so far biggest version compatible with all the other boxes. Japan and Asian style inspired stackable box for all kinds of gadgets. Look for my compatible stackable Business Card Box . Try to use the Separator and Organizer I…
It's Can holder for desk
GeoCaching: Gabel - Öffnung 66mm - M6-Mount - Haken / Spitz 4 Modelle: 130 - Spitz 133 - Spitz - 5x Bohrungen Ø6.2mm 135 - Spitz - 5x Bohrungen Ø6.2mm - Spitze 1x konisch => My Favorite 136 - Spitz - 5x Bohrungen Ø6.2mm - Spitze beide…
Fibonacci256 is a beautiful 166mm circular disc with 256 WS2812B RGB LEDs surface mounted in a Fibonacci distribution. Fully open-source software, and programmable over Wi-Fi or micro USB cable. Buy fully assembled or as a kit from Evil…
Japan and Asian style inspired stackable box for all kinds of gadgets. Look for my compatible stackable Business Card Box . Try to use the Separator and Organizer I made and recommend. This is one first element on more to come. All…
Japan and Asian style inspired stackable box for all kinds of gadgets. Look for my compatible stackable Business Card Box . Try to use the Separator and Organizer I made and recommend. This is one first element on more to come. All…
GeoCaching - Hook 66mm - M8 Mount - Gripper ready Montage Material: 1x - M8 x 30 - Inbus - ( je nach Bedarf - 1-3 Schnorr-Scheiben ) 1x - M8 Stop-Mutter - ( je nach Bedarf ) 4x - M5 x 14 - Inbus - Montage 4x - M5 Stop-Mutter - Montage 7x…
This HCR was used to mount some Rotiform wheels to my VW Alltrack. My printer was blobbing a bit on the interior angled section, so you may have to use sandpaper to make sure the ID is uniform for your hub. This should fit most…
66mm Shim for an Open Builds Router Spindle Mount. Similar to those from Ooznest for the WorkBee but with a smaller lip and profiled trim at the back. Will also work for the Queen Bee and other variants. I printed in ABS but other…
Seals for cans with a diameter of 53mm (250ml like those from RedBull or Tiger) or 66mm (500ml like beer or some sodas). I sometimes like to drink only half of my energy drink, but it is problematic to carry open can in backpack. So i…
Cortador para biscoito circular 66mm para massas finas com um corte preciso
circularsaw hanger, made for milwaukee M18 BLCS66 but fits most milwaukee tools
I used PLA, 0.2 works fine. Minimal Supports, only used on the side with the slides for the cutter and on the bottom of the little slicer holder. Made a while ago, so no pictures but figured if this would help even one person, it would be…
This simple can stacker allows you to safely stack two cans on top of two others, doubling vertical storage density while keeping the cans from rolling around. The design was created in OpenSCAD and optimized to use as little material as…
1 perimiter 10% infill (I used cubic) 95A Shore TPU from 3DJAKE Fits and holds it perfectly, simple model 40min print.
I noticed some of my ARC students struggling with placing and drilling Altimeter holes in their rockets. This guide or jig lets them drill holes quickly, evenly, and precisely with a drill and drill bit. Can be printed with any filament…
Please like before downloading the model . Thank you so much for your support ✌ A crate with a wood texture imitation for beer cans, energy drinks 66mm cans The crate is built using traditional woodworking joints. Glue is required for…
Download and 3D print this holder for push-on (clip-on) gas canisters! Securely fixes standard cylindrical 65-66mm canisters in a strictly vertical position on a 25mm diameter camping table leg. Essential for safe operation of push-on gas…
GeoCaching: Gabel - Öffnung 66mm - M6-Mount - Haken / Spitz 4 Modelle: 130 - Spitz 133 - Spitz - 5x Bohrungen Ø6.2mm 135 - Spitz - 5x Bohrungen Ø6.2mm - Spitze 1x konisch => My Favorite 136 - Spitz - 5x Bohrungen Ø6.2mm - Spitze beide…
GeoCaching - Hook 66mm - M8 Mount - Gripper ready Montage Material: 1x - M8 x 30 - Inbus - ( je nach Bedarf - 1-3 Schnorr-Scheiben ) 1x - M8 Stop-Mutter - ( je nach Bedarf ) 4x - M5 x 14 - Inbus - Montage 4x - M5 Stop-Mutter - Montage 7x…
No longer left or right clamps as per the original design, this reduced width ( 66mm ) and deeper worktops ( 60mm ) version, fondly known as "Half-Size", is central alignment. The H-S needs less filament and prints quick, but just as…
Highly recommended to print with PETG, but if you only have PLA, I've included some notes below. Print on side as shown. Jar may slide down and rest on brim if heavy enough. Might benefit from some tape on the inside of the clamp to add…
This is a 3D printable dispenser designed to hold and organize 6 standard tuna cans (approximately 66mm diameter). I've added a 2mm tolerance to ensure cans fit smoothly. Features: Holds 6 standard tuna cans 2mm tolerance for easy can…
Original one is too narrow, so I made it wider (to fit my ski) and remove the unnecessary bottom part (looks nicer to me).
Download and 3D print this holder for push-on (clip-on) gas canisters! Securely fixes standard cylindrical 65-66mm canisters in a strictly vertical position on a 25mm diameter camping table leg. Essential for safe operation of push-on gas…
For Spool with Inner Diameter from 45-66mm. All of my spools have a larger inner diameter which doesn't fit with the original design. So I come up with this remix.
Impreso en abs o petg con parametros de impresión de Voron.
This is my first published 3D design: a 66mm outer diameter (OD) wheel, originally created as a replacement when I needed wheels for a robot project. The model was printed in PLA and proved to be a reliable option. It features a snug,…
No longer left or right clamps as per the original design, this reduced width ( 66mm ) and deeper worktops ( 60mm ) version, fondly known as "Half-Size", is central alignment. The H-S needs less filament and prints quick, but just as…
The model has slots for 4 * 6mm diameter x 3mm depth cylindrical magnets. Use glue to secure the magnets into place. The internal dimensions are designed to fit 91mm x 66mm card sleeves, with the internal dimensions of the box being 92mm…
different variations for battery/control box tops compatible with power function connectors Category: Construction Toys
66mm Shim for an Ooznest Dust Shoe . Similar to those from Ooznest for the WorkBee but with a smaller lip. Will also work for the Queen Bee and other variants. I printed in ABS but other filaments should also be fine.
I made this as an alignment tool for my wife's Zojirushi short thermal cup. Without it, the cup was frequently in the wrong place and her cocoa dribbled partially down the side. The adapter works well with taller vessels and does not…
This is a remix of http://www.thingiverse.com/thing:2154260 snug fit for 35x66mm boards. Mount the PCB with m3x4 screws. The outer screw mounts have been moved to the corners to leave the screw connectors easily accessible. Print Settings…
height : 66 mm PetG 0.8 nozzle Print Settings Printer Brand: Flsun Printer: Flsun Super Racer Rafts: No Supports: No Resolution: 0,64 Infill: 45 Filament: Porima PetG Gray Category: Household
Roller length ~66mm, 19 millimeters shorter that original, for the Enclosure and for the Arm Print instructions: Printer Brand: Prusa Printer: MK4 Rafts: No Supports: Yes Resolution: 0.2 Infill: 30%(Connector-Infill: 100%) is…
Para botes de spray comunes….pinturas, WD40, etc etc de 66mm de diametro
