66MM canopy tophat Box Turtle legs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Box turtle mounts for the Canopy 66mm tophat 350 plain only 300 hex and plain work in progress
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 46
- Wydruki
- 1
- Wyświetlenia
- 794
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
repo is still a work in progress
I was asked by a few members in the BoxTurtle community to design some mounts for their Voron 2.4's which use Luc1luc Tophat design
Link:
https://www.printables.com/model/567013-voron-24-trident-tophat-66mm
Included are a few different models to help the user achieve the desired fit with their panel/foam tape combo.
There are .stl's below that you can test your fit with before you print an entire leg.
NOTE: users with LDO kit machines report that the 10.5MM version of legs fit the best.
BOM:
3xM3 Hammerheads (rollnuts will work on boxturtle frame)
1x M3x12
2xM3x8
per leg
Print settings:
- Layer Height: 0.2mm
- Extrusion Width: 0.4mm, forced
- Infill:
- Percentage: 20%
- Type: Grid, Gyroid, Honeycomb, Triangle, or Cubic
- Walls: 4
- Top/Bottom layers: 5
Multi Color:
These files can be uploaded in your slicer, Orca for example. Load the .step file and simply paint Objects 2 and 3 in your accent color and object 1 in your primary color.
example:
IMPORTANT!
This model uses bridges in the design, your machine must be capable of printing ≥8mm spans. To print these properly without supports you'll need to make sure you have “Extra perimeters on overhangs” deselected
example:
special thanks: Nemesis & Smart Ostrich for the input and testing.