66MM canopy tophat Box Turtle legs
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Box turtle mounts for the Canopy 66mm tophat 350 plain only 300 hex and plain work in progress
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 46
- Makes
- 1
- Views
- 794
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution
repo is still a work in progress
I was asked by a few members in the BoxTurtle community to design some mounts for their Voron 2.4's which use Luc1luc Tophat design
Link:
https://www.printables.com/model/567013-voron-24-trident-tophat-66mm
Included are a few different models to help the user achieve the desired fit with their panel/foam tape combo.
There are .stl's below that you can test your fit with before you print an entire leg.
NOTE: users with LDO kit machines report that the 10.5MM version of legs fit the best.
BOM:
3xM3 Hammerheads (rollnuts will work on boxturtle frame)
1x M3x12
2xM3x8
per leg
Print settings:
- Layer Height: 0.2mm
- Extrusion Width: 0.4mm, forced
- Infill:
- Percentage: 20%
- Type: Grid, Gyroid, Honeycomb, Triangle, or Cubic
- Walls: 4
- Top/Bottom layers: 5
Multi Color:
These files can be uploaded in your slicer, Orca for example. Load the .step file and simply paint Objects 2 and 3 in your accent color and object 1 in your primary color.
example:
IMPORTANT!
This model uses bridges in the design, your machine must be capable of printing ≥8mm spans. To print these properly without supports you'll need to make sure you have “Extra perimeters on overhangs” deselected
example:
special thanks: Nemesis & Smart Ostrich for the input and testing.