Voron 2.4 & Trident Tophat 66mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Originally Made after the Wish of an User on Discord Available in different Sizes. Adds around 66mm Space in Z direction
- Ocena
- 5 / 5
- Polubienia
- 149
- Pobrania
- 827
- Wydruki
- 15
- Wyświetlenia
- 4536
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Previously to everything else, if you would need an adpated Version, like different Panel Size etc., just DM me and i might adapt and add it.
(TBD) Modded back pieces for Umbilical Passthrough
(06.09.2024) Screwable Retainer Lid for the Panel. To accomodate for different thickness of panels
(01.02.2024) Added CAD Files and made the 66mm Version to be screwed down
(04.09.2023) Updated to newer Version slightly incresed thickness, to minimize artifacts
This Tophat grant extra travel for Z so your bowden and possible Umbilical/Can Wires don't hit the top panel and get squeezed.
Right now made for Standard 3mm Panels. If asked, i will try to do for thicker Panels
Disclaimer: This Modell likely needs you to calibrate shrinkage before.
BOM: (for Basic Configuration | not including LED Mounting or special Skirts)
Printed Parts:
- 2 Panels of each type (look for your desired size)
- 4 Connector Plates
- 4 Cover Plates
Hardware:
- 24x Heatset Inserts
- 32x | M3x8
- 16x | M3 Hammernuts or T-Nuts