TBS Tango 2 Gimbal Guard / Tango II
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
TBS Tango 2 Gimbal Guard - protect your standard edition gimbals.
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 584
- Wydruki
- 6
- Wyświetlenia
- 2761
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution
TBS Tango 2 Gimbal Guard - protect your standard edition gimbals.
This is a basic gimbal guard for the new TBS Tango 2 remote control. It is designed for the standard edition that doesn't have the nifty folding sticks.
There are 3 versions -
- tango 2 gimbal 9.5mm stick ends screen and logo v6.stl for a loose fit and with nifty logo
- tango_2_gimbal_9mm_stick_ends_v3.stl - a 9mm hole for a nice fit
- tango_2_gimbal_9mm_stick_ends_screen_v2.stl a 9mm hole for a nice fit, and space for the lanyard holder and a screen protector
I recommend "tango 2 gimbal 9.5mm stick ends screen and logo v6.stl"
I think it could be used for the Pro edition (if you are worried about the folded sticks scratching your gimbal surrounds).
Once i get (or print) the neck strap holder i may update - maybe with screen guard too
Print in PLA or TPU with supports needed for the middle brace and the TBS logos.
Print instructions
I use more outer shells for strength - say 4. Will need supports for the middle brace and the Sheep logos. Print in PLA or TPU