111 modeli
With this guard the antenna is protected against breakage during transport. Printed in PLA, PETG might be better, given the higher temperatures in summer. Used little of support for the one bridge, but it should be fine even without it.
Simple cap for Vortex Crossfire, it rescaled it a little bit to fit better on my Vortex Collimator
Hey there, I have created this model to upgrade my GPRC Mark 4 frame with the new DJI O3 air unit. I have made 2 Version: Version 1 with DJI O3, antenna and GPS mount: The bottom left and right part to hold the DJI O3 Air Unit in place.…
Made a quick remix of the already discontinued betafpv Micro-Nano module adapter (they probably realized they can make more money making a ELRS Micro module) to be used with TBS nano style transmitter modules and hopefully other nano…
Print in TPU. Use needle nose pliers to hold the SMA in the hole in place. Tighten the Antenna by hand. Its pretty tight, but the result is, that your Antenna wont move! I created different versions for different SMA Connectors! added GPS…
nazgul xl5 mount crossfire buzzer gps PS. Mogę wydrukować i wysłać na terenie Polski.
Tested on my HSKRC XL Frame (XL9 Arms), which is very close to the iFlight XL7. Standoffs in my case are 5mm (which could differ from the iFlight model), so the holes are tailored to that size. I added a TBS crossfire antenna holder to…
with TPU you can print without supports
This is an adapter for the TBC Crossfire Micro and Full TX, which will fits right on your FrSky Taranis X-Lite. Wiring All you need to know, how to wire it up, you can find on my Blog: English:…
Print with TPU, 3 layer walls
printed in TPU. I made this so my TBS crossfire antenna wires go underneath the two upright camera mount plates and your T antennas clip in. This is fit on my QAV-s Joshua bardwell edition, idk if the other versions of the frame will fit…
Thanks to StarrCycles for the inspiration. I started with his and modified for more strength and support for larger machine torches. I also added recess in the back for a couple of screws on the Z axis that stick out. it helps with…
Crossfire antenna mount. Print in TPU and mirror for other side.
This is a collection of upgrade parts I designed for my Langmuir Crossfire CNC plasma table: Strain relief anchor for Y axis motor cable Strain relief anchor for plasma torch and Z axis motor/switch cables Print Settings Printer:…
CNC Sheet Alignment Tool for CrossFire Pro by Langmuir Systems. All credit goes to the original author who produced this design to be cut out of steel on a CNC plasma table. This model is 3D print friendly and requires no supports. Two…
Bumper arriere Crossfire
This is a 3D printed torch shield for the Langmuir Systems Crossfire CNC plasma cutter that uses a Hypertherm machine torch. It includes a holder for 2 inexpensive line lasers that will aid in material positioning under the torch. The…
If you have a CrossFirePower Milwaukee battery adapter on your Dyson V8 this will let you still use the wall mount that came with your vacuum. I printed mine flat-side down with no supports using Overture PETG in grey. I had to sand the…
This is a rear mount for both a BN220 GPS unit & a TBS crossfire immortal antenna to fit the iFlight XL5V5 frame (Drones such as the Nazgul5). Unlike others out there, this doesn't replace any of the existing parts. The rear frame bars…
An adjustable mounting solution for generic IPTM80 / PTM80 machine torch from Amazon to mount to the Langmuir Crossfire CNC Plasma Table. Also has mounting brackets for two straight line lasers for easier lining up of work piece.…
Ця модель створена для візуалізації зовнішнього вигляду TBS Crossfire Lite TX. Ви можете легко використовувати його у своїх збірках і довіряти розмірам цієї моделі.
A simple replacement for the GEPRC crossfire immortal T antenna holder. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: Saint Smart TPU Post-Printing ============= Category:…
Antenna Mount for DJI O3 Air Unit + Crossfire Immortal Antenna. Credits: botgrinder & barontechnologies Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Yes Resolution: 0.3 Infill: 80 Filament: Sain…
FlySky FS-I6X extension dor Micro TX modul (Crossfire, ExpressLRS, etc) and external battery.
Inspired by the classic Crossfire game , I have created OpenFire, a modularly designed, up to 6 player take on the fast paced, tabletop marble hockey board game! With this redesign of the classic you can now compete against your whole…
Lens Covers/Caps for a Vortex Crossfire II 3-9x 40mm Rifle Scope The stock lens covers/caps do not stay in place and the elastic cord is defective over time. My solution was to design my own version of lens covers/caps that fit securely.…
This design is a Spotting Scope adapter for Iphone 15 Pro Max, with MagSafe cover. Designed for Vortex Crossfire HD 20-60x80A
A modification of rofatincool's Bearga barrel. Adjusted for better fit and higher power increases shot speed from about 10km/hr to about 20-25km/hr
Here is a mount I designed for the fpv and crossfire antennas for my mr.croc frame from flywoo. Hope you'll enjoy it!
Laser adapter for a Langmuir Systems Crossfire Pro CNC plasma table. Includes Ruggeduino laser controller schematic. Controller used is an industrial Arduino UNO from https://www.rugged-circuits.com/ The enclosure I used:…
can be print without support i used tpu you need a zip tie
Simple friction fit turret cap for a Vortex Crossfire red dot sight. Printed with Elegoo PLA+ @ .18mm layer height with the top side of the cap facing the build plate with supports.
Pulled out the antenna and fold it for better storage. Use 2 zip ties through the hole (1mm) and secure the tbs crossfire antenna
support pour le crossfire tbs nano , compatible pour la frame Flywoo Mr croc se prend entre 2 entretoises centrales parfaitement ajusté a printer en tpu Category: 3D Printing
Not too bulky. Just enough to grab or push with your thumb. Made out of PETG for Flexibility and Heat Resistant Use of a single #4 x 1/2" wood screw to clamp onto scope
I love the SL5 frame and this a nice way to fit the airunit into the small frame. I remixed the design a butchered a nother antennamount and crossfire aswell. Category: 3D Printing
Print in TPU. Use needle nose pliers to hold the SMA in the hole in place. Tighten the Antenna by hand. Its pretty tight, but the result is, that your Antenna wont move! I created different versions for different SMA Connectors! added GPS…
The Crossfire antenna mount is designed to fit the ImpulseRC Echo without the need for glue or additional parts. Print settings: Material - TPU Infill - 30% Walls - 3 Supports - None
Just bought a Crossfire and didn't find the existing protectors/stands to my taste. Printing them was too much of a hassle and using screws with 3D printed parts has rarely worked out for me. What's more, I'm not sure the other stands fit…
TBS Source One V5 TBS CrossFire Immortal T Antenna Mount
I designed this tube to transform a normal TBS Crossfire Micro antenna into an Immortal T. Things needed for the build: T printed in TPU micro antenna two 3mm diameter tubes about 80mm and 72mm in lenght. a zip tie To assembly the…
mount designed for a baby ape pro drone but compatible with multiple other drones that have the same 20mm spacing between the two holes. printed in fiberlogy fiberflex 40D no supports, meant to be folded. you can't use stiff filaments
A modification for the Langmuir Crossfire Pro to use garden hoses (without couplers) for draining the table. Uses ½" garden hose and clamps (example: https://www.amazon.com/dp/B0006JLSNI?th=1 ). Make sure to retain the rubber o-ring and…
a mount for the Zenchansi e7082VM VTX and TBS Crossfire Nano RX VTX: https://de.aliexpress.com/item/4000938942385.html RX:…
Yet another TBS Crossfire module protector cover stand. Print in any rigid filament of your choice. No supports needed. You'll need 4pcs of M2 10mm bolts and nuts.
This is a mount/holder for a TBS crossfire nano rx module for the SpeedyBee Master 3X. It's designed to fit roughly like the original RX cover (slipped under the frame on one side and screwed in on the other). The one pictured is slightly…
SabotageRC Dingo Crossfire immortal-T 30 degrees mount Print with TPU @100% infill This could fit other sabotagerc frames and it also fits the armattan mongoose UPDATE: WAYLANDIR75 requested a Reverb and Marmotte mount, so I used the…
I am a big fan of the work from https://www.thingiverse.com/bgill142 . He came up with the absoluetly smallest possible case for the TBS Micro TX. However, his design is hard to print if you don't happen to have an SLA Printer. Also, I am…
Mount for roof antenna mount, so you can extend your RC antenna to the roof of the car, when flying outside is too cold and you want to do it out of your car. Use 4 8x2 magnets glue them in with CA glue, cover the bottom base with duck…
Did not find an Crossfire holder which fits my needs so i designed a new one. I used TPU printing this. Wire goes through a gap at the bottom of the drone. Mounting of antenna in front.
Lens protector for the Crossfire Vortex II red dot sight, While Vortex has an amazing lifetime warranty I'd prefer to not have to go through the hassle of ever using it. Protectors are press fit to the front already however for added…
First off I wanted to thank Evmoius for thinking of this, as it's a great idea. I created a redesign of this idea in Fusion from scratch in less than 30 min. If you like it please TIP the creator Evmoius, not me, since he gave this great…
My Armattan setup, designed, printed, tested, redesigned and tested several times :) The R-XSR Mount is a remix of another design, with some modifications to fit the other parts I designed. It is in final, printed with PLA, no support,…
Print in TPU, enjoy ! Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Infill: 100 Filament: SaintSmart TPU Category: R/C Vehicles
The tail is a remix of the impossible tilt. I have revised it to fit the Tricopter LR better. I also strengthened the servo holder. This design uses 3mm IDx6mm ODx2.5mm deep ball bearings (2) in the back mount to reduce friction to a…
Print in TPU. Use needle nose pliers to hold the SMA in the hole in place. Tighten the Antenna by hand. Its pretty tight, but the result is, that your Antenna wont move! I created different versions for different SMA Connectors! added GPS…
Lumenier QAV-PRO 3.5" Mini Whoop - Immortal T Crossfire Mount and DJI O3 Air Unit Isolation Pad
This is a 3d model of the Estes Crossfire. The Crossfire is supposed to fly up to 350 meters on a c6-5, in reality it only flies up to around 255 meters. The 3d printed version is a mono body design, meaning that the fins, motor mount,…
printed in TPU
Made to fit larger diameter machine torches. I'm using the Tecmos UPM 105 machine torch sold on PrimeWeld.com Also gave it a flat surface on the back in order to be able to secure bolts with nuts. UPDATED: 1/4/25 Wider holes for ¼ bolts
Guide for the X axis servo wire. This keeps it away for the tubing and screw.
I have a very tight build where I assumed the wrong esc dimension but luckily there was enough space at FC height so i designed a riser that sits on soft mounting grommets, added a holder for rx and a sort of doughnut where i could route…
I was annoyed having to remove the T-Antenna every time packing my radio up in my bag. So I retrofitted the Tango 2 antenna to my Crossfire TX. This is now more compact. Rotates like on the Tango 2. Test fitted on my Tango 1. The antenna…
Made a mount that attaches to the top of the Z motor on a Langmuir Crossfire pro with Z height. This allows you to attach a cable chain and route the cable along the X axis bar. Others mods are needed for everything to work together.
TBS Crossfire Nano RX original antenna mount. Category: Hobby
Parts I made for my Hyperlite Freerange Frame. Specifically for DJI camera and Crossfire nanoRX/Immortal-T. The HD camera mount is meant to be used with the Caddx Peanut. Screwed on the front and clamped to the top plate in the back.…
Tiny mount for the Lumenier QAV-PRO Micro Whoop 2.5'' Micro frame. Allows you to mount: HDZero Whoop LITE VTX TBS Crossfire NanoRX Best printed in TPU, see pictures for assembly.
Same print settings for the original cover, I added a strap mount holder so that I can strap my 3S LiPo to the TX 16S for using with my full crossfire module. Category: Replacement Parts
Simple Langmuir logo rail end caps for your Crossfire XR. It replaces the non-descript black caps that are included with the plasma table kit.
I was tired of seeing crossfire rx supports that require you to remove the small carbon square to be positioned between the two arms. That small square is used to protect the screws and the arms themselves from possible crashes,…
Needed to mount my TBS Crossfire Antenna to my new Diatone 2019 R349, so I came up with this design. It should work on the R249 and possibly the R239. I printed everything in TPU. I also used the default FLEX setting on my Prusa MK3, but…
other side has to be mirrored in slicer for clean nanoRX installation i recommend this print https://www.thingiverse.com/thing:4731250 if you like this give me a sub on IG or YT https://www.instagram.com/martymcfly_fpv…
a 20x20 crossfire nano mount
Mount for crossfire antenna Print instructions Unassociated tags: larva x , rx receiver Category: R/C Vehicles
I´ve created a mount for tbs vtx antenna pigtails, Fr-Sky R9 T-antannas (maybe tbs T-antennas will fit too) and hglrc ublox M8N GPS module (many other will fit too). The GPS-Module can be tied with a small ziptie. Print Settings Printer:…
Antenna mount for the TBS Crossfire nano that fits directly underneath right in the center Category: R/C Vehicles
This part is intended to be used to mount a TBS Minimortal T antenna Rotor Riot Bubito frame. Parts should be printed using TPU/Flex (Sainsmart recommended) with a minimum of 80-100% infill and .15 resolution.
Hello, I only use TBS Crossfire on my quads therefore I don't really need the 2,4GHz Module/Antenna. I wanted to remove the antenna because it's often in the way. But I opted to mount a SMA connector for the 2,4GHz just in case I need it…
I made a round adapter that fits into the eye piece of the Vortex Crossfire HD 20-60x80A inside there is a RPI Camera module V2.1 connected to a Raspberry Pi 3 module. You can then access the camera live feed directly from the Raspberry…
Hello everyone! This is a 3D printed picatinny rail mount piece for the Nerf Strikefire/Crossfire. I recently purchased this well loved red Crossfire that had a partially messed up rail attachment piece at the top, and I figured it would…
made a remix to fit bigger (10mm diameter) capacitor in the side holes Print Settings Rafts: Doesn't Matter Supports: Yes Filament: tpu tpu Category: R/C Vehicles
A mount for betafpv X95 crossfire antenna
Mount for the Team Black Sheep Crossfire immortal T antenna. Designed to mount onto the Source One series of frames. This will mount onto any of the Source one series of frames and provide clearance for +4 inch frames. Any small size zip…
This is a mount for Team Blacksheep's Crossfire Immortal T antenna and Unify Pro SMA pigtail. Print in TPU with about 15% infill and supporta enabled. Mount the Immortal T in the TPU piece before mount everything to the frame. This thing…
This is design was made specifically for the Tubular frame family. It's a frame that you can build at home for very little money - yet it is super stiff and flies aweseome! This mount is printed in TPU and put on the front rod. You can…
Rangez l antenne de votre Micro TX Crossfire de chez TBS sans risques de l abimer pendant le transport
I fly long range fpv airplanes and was always worried about crashing and not being able to find the plane. So I came up with this setup to keep the RX running even if the main battery is ejected. Depending on how you set it up you can…
Platine et rallonge pour le NAN de Chez TBS Juste deux vis M2.5 X 5 pour le fixer simplement sur la platine existante Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament:…
EVERYONE SHOULD PRINT OFF A CROSSFIRE LOGO
Got tired of screwing and unscrewing the Diamond antenna, so made a mount for it. Fits in my bag perfectly and holds the antenna in place. Not ideal for longrange but works for me. A little tricky to mount if you decide to keep your…
Support for antennas SMA and TBS Crossfire Immortal T for the Nord5 frame
I designed this antenna holder for my naked GoPro BetaFPV Beta95 CineWhoop. Simple, flexible, easy to print. I attached the modifiable f3d archive, so it is easy to edit with Fusion 360. Check out my unbelievably awesome naked GoPro mount…
Hello everyone! This is a replacement barrel for the Nerf Strikefire/Crossfire that features a two dart inline clip. I recently purchased this well loved red Crossfire, and I figured it would be a fun candidate to make some quick and easy…
dimple guide for tracing a circle to keep the dimple die mod on the crossfire forums nice and center. Category: Parts
This is a small mount for the Armattan Tadpole 3" intended to hold a stock TBS Crossfire dipole antenna at a 120 degree bend. Inspiration credit obviously goes to Mr. Steele. While this is definitely less efficient than a straight dipole…
Stealth Long Range + Crossfire Nano on a 30,5 x 30.5 mount printable without support (max overhang 45 degrees) Category: R/C Vehicles
This thing is a remix of M_Tops' Antenna and GPS mount, shich is a brilliant design as it incoprorates GPS, Corssfore Immortal T, VTX AND!!! Dual Capacitor mount for the iFlight iH3 frame. Two things did not fit for my build, which is why…
Basically the same as the stock receiver mount, but slightly bigger so it can fit a Crossfire Diversity receiver.
Found an idea on thingiverse, printed it but it did not work.. Had to design a new one from the scratch with different mounting option, longer legs, less sticking out profile. This is a version 3. Had to print 3 different prototypes and…
;;;updated>> v4 I bought a used table it was missing the drain plug, so i 3d printed an adapter so i could put a inline hose shut off on and also attach a hose to drain the table. Print instructions Category: Parts Summary
