RPI Camera round adapter - Vortex Crossfire HD 20-60x80A
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made a round camera adapter that fits into the eye piece of the Vortex Crossfire HD 20-60x80A
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 177
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
I made a round adapter that fits into the eye piece of the Vortex Crossfire HD 20-60x80A
inside there is a RPI Camera module V2.1 connected to a Raspberry Pi 3 module.
You can then access the camera live feed directly from the Raspberry Pi via HDMI,
Or you can run it as a headless setup, and the access the live feed from an external PC or MAC.
Please note:
This project only includes the 3D print files and f3d files
Assembly instructions:
- Assemble the printed parts (see exploded view picture or f3d file)
- Use super glue to aattach the "Distance plate and camera cable guide" on the top of the housing
- Use super glue to attach the backside of the "lid for camera housing" onto the "Distance plate"
(see pictures or f3d file) - Attach the end of the camera ribbon cable into the camera slot on the RPI 3
- Guide the camera ribbon cable up thru the camera slot in the RPI housing
- Guide the cable inside / backside of the “Distance plate and camera cable guide”
- Fold the ribbon cable in the end, and guide the ribbon cable back same way
- Guide the ribbon cable up thru the slot in the “Distance plate and camera cable guide”and into the slot in the back of the “Lid for camera housing”
- Attach the end of the camera ribbon cable into the slot on the RPI camera module
- (see pictures or f3d file)
Info.:
I have uploaded a f3d file so that you edit the design in Fusion360
Fusion360 Files:
- RPI Camera round adapter - Vortex Crossfire HD 20-60x80A v3.f3d
STL Files:
- RPI Camera Housing.stl
- Lid for camera housing v1.stl
- RPI camera module v2 v1.stl (Don't print this file, its only for example view)
- Distance plate and camera cable guide v1.stl
- RPI_Top_Housing_Hex_SM_Cam_Disp_Pins v1.stl
- RPI Bottom_Housing_Hex_SM v1.stl
- RPI Camera round adapter - Vortex Crossfire HD 20-60x80A v3.f3d
Credit to the original designer:
Please note that the RPI housing used in this project,
is the "Malolo's screw-less / snap fit Raspberry Pi 3 Model B+ Case" created by Malolo
https://www.thingiverse.com/thing:3719217/files
Print Settings
- Rafts: No
- Supports: Yes
- Resolution: 0.2
- Infill: 15%
- Filament material: PETG
Post-Printing:
- Remove all support material after printing
How I Designed This:
- Designed in Fusion360