1 / 7
DJI O3 GPRC Mark 4 Upgrade with Antenna, GPS and Crossfire Holder — zdjęcie 1
1 / 7

DJI O3 GPRC Mark 4 Upgrade with Antenna, GPS and Crossfire Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

With this model you could upgrade your GPRC Mark 4 frame to hold a DJI O3 air unit with antenna & Beitian BN 220 GPS.

Ocena
0 / 5
Polubienia
37
Pobrania
650
Wydruki
0
Wyświetlenia
4418
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Hey there,

I have created this model to upgrade my GPRC Mark 4 frame with the new DJI O3 air unit. I have made 2 Version:

Version 1 with DJI O3, antenna and GPS mount:

  • The bottom left and right part to hold the DJI O3 Air Unit in place.
  • The top part to hold the antenna of the air unit and the Beitian BN 220 GPS.

You could easily remix the top part to fit your GPS or if you want to remove the GPS part. The top part is 8mm high.

Version 2 with DJI O3, antenna, GPS and Crossfire mount:

  • The Crossfire mount (2x) to hold the Crossfire immortal t antenna.
  • The bottom left and right part to hold the DJI O3 Air Unit in place.
  • The top part to hold the antenna of the air unit and the Beitian BN 220 GPS.

I hope you like the model. Feel free to contact me for improvements, suggestions or questions.

Enjoy your flights and happy printing.

Tom

Tagi