Joel Telling of Additive Manufacturing 4.0
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It seemed fitting to emboss a nozzle size of 4.0 - suggesting the standard 0.4mm scaled-up and alluding to Industry 4.0
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 208
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I chose to remix and print the 3dimensionz model, with the following adjustments:
- I embossed a 4.0 onto the nozzle and flattened its tip more to scale
- I added small discs between the fittings and the suit, where the base model seemed otherwise vulnerable to printing without supports.
- The clean-shaven face seemed an obvious oversight, but I clearly lacked the skills to add printable face fuzz, so that part of the remix needs more work by a talented modeler.
I was able to print this model on my CR6-SE with a 0.4mm nozzle, using Cura 14.3.1 Arachne Beta 2 to slice it at 0.12mm layer height (0.24mm initial layer height), 0.42mm line width, at 50mm/sec.
I used the Cura overlapping models feature to set the nozzle infill to 100%, while the rest of the figure was 25%. With 3 walls, the hose from case to suit printed without infill.
I used custom supports to hold the nozzle steady, blocked all support between the left boot and the case, and blocked all support from the waist-up, on the character.
It took approx 8hrs 44min to print.