1 / 6
Compact Cable Clip (Parametric)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cable clip that doesn't take much more space than the cables it contains. With or without screw hole. Parametric.
- Ocena
- 4,778 / 5
- Polubienia
- 54
- Pobrania
- 307
- Wydruki
- 10
- Wyświetlenia
- 898
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 10) (Komentarze: 12)Remiksy (0)Kolekcje (96)Powiązane
I wanted a cable clip that can fit in small spaces and that can be as small or as big as I need for a specific use case. Enter the Compact Cable Clip (Parametric) ™ !
Features
- Tweak parameters in Fusion 360 to get the exact clip size you need.
- Optional screw hole that screws through the clip itself to reduce the clip's footprint.
- Due to the screw being in the center, the clip won't deform over time under the cable's weight like clips with the screw on a single side tab might do.
Customization Instructions
Change the following parameters in Fusion 360 to alter the clip to your specifications:
internal_height(blue)internal_width(red)depth(green)screw_hole_diameter(top hole) to fit the head of the screw you want to usescrew_threads_diameter(bottom hole) to fit the threads of the screw you want to use
In addition, you can suppress the last 3 features to remove the screw hole, if you want to stick the clips to a surface using double-sided tape.
Printing Instructions
- Print them sideways.
- Printing with a lower layer height might help make the holes cleaner, but it's probably not necessary.
- Use PETG if you want the clips to be more flexible. PLA is fine in most cases, too.