Bookmark
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This a simple design of a bookmark, which can be printed without top and bottom layers to create a cool pattern.
- Ocena
- 4,5 / 5
- Polubienia
- 36
- Pobrania
- 286
- Wydruki
- 3
- Wyświetlenia
- 1781
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a simple design of a 3d printable bookmark.
If you want a cool design like the one shown in the picture, you can print this with no top or bottom Layers and ~40 - 30% Infill. Then you can choose the Infill pattern of your liking (The pattern shown in the picture is Grid), slice the model and upload it to your printer! If you want a plain design you can print with the top and bottom layers. For the plain design I do not recommend Infill, since this is a really thin print.
Settings I used for the pattern:
Wall line count: 5
Top and bottom layers: 0
Layer height: 0.2mm
Infill: 40%
Supports: disabled
Bed adhesion: skirt
Settings I used for plain design:
Wall line count: 5
Top and bottom layers: 3
Layer height: 0.2mm
Infill: 40% (does not matter)
Supports: disabled
Bed Adhesion: Skirt