Bookmark
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This a simple design of a bookmark, which can be printed without top and bottom layers to create a cool pattern.
- Rating
- 4.5 / 5
- Likes
- 36
- Downloads
- 286
- Makes
- 3
- Views
- 1,781
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution — Noncommercial
This is a simple design of a 3d printable bookmark.
If you want a cool design like the one shown in the picture, you can print this with no top or bottom Layers and ~40 - 30% Infill. Then you can choose the Infill pattern of your liking (The pattern shown in the picture is Grid), slice the model and upload it to your printer! If you want a plain design you can print with the top and bottom layers. For the plain design I do not recommend Infill, since this is a really thin print.
Settings I used for the pattern:
Wall line count: 5
Top and bottom layers: 0
Layer height: 0.2mm
Infill: 40%
Supports: disabled
Bed adhesion: skirt
Settings I used for plain design:
Wall line count: 5
Top and bottom layers: 3
Layer height: 0.2mm
Infill: 40% (does not matter)
Supports: disabled
Bed Adhesion: Skirt