1 / 7
Dowel Style Modular Shelving Furniture — zdjęcie 1
1 / 7

Dowel Style Modular Shelving Furniture

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Modular system for shelving furniture using dowel, wood specifically.

Ocena
0 / 5
Polubienia
67
Pobrania
187
Wydruki
0
Wyświetlenia
1740
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Home Decor
Licencja
Creative Commons — Attribution — Noncommercial
Note: My printer is currently being repaired, therefore this design has not been tested, for the moment. However, it has been designed with printing accuracy in mind in regards to fits.

 

A modular furniture system using dowels as support for shelving. This is intended to reduce the amount of wooden boards and 3D printed parts necessary to make DIY shelves. The only limit is your imagination… and materials.

A clearance of .150mm (.006in) is used for all interconnecting parts (dowels, shelves). Dowels slot into a 4mm thick, 15mm depth hole to ensure a snug and secure connection. Two wooden screw holes, located on the bottom, are available to better fasten the joints with the shelf, if necessary.

 

Materials:
  • 1 ¼in diameter wooden dowels - cut to size
  • ½in wooden board (plywood, MDF, particle board, wood planks, etc.) - cut to size
  • #6-5/8in countersunk wood screw, flat-top (estimated screw length)

 

Assembly does require some woodwork to cut the desired shelf size and dowel length to build, as well as making sure everything is level.

 

Recommended Print Setting:

Layer Height: 0.2mm

Infill: 10-20%

Supports: yes

Tagi